Renault Clio: Charge circuit: Specifications

D4F or F4R or K4J or K4M or K9K or M4R

ALTERNATOR SPECIFICATIONS

Renault Clio. Charge circuit: Specifications

Charge circuit: Function

D4F or F4R or K4J or K4M or K9K or M4R

OPERATION

These vehicles are fitted with a built-in regulator and an instrument panel warning light which operates as follows:

Charge circuit: Check

D4F or F4R or K4J or K4M or K9K or M4R

Check the current after 30 minutes of heating at a voltage of 13.5 V.

Renault Clio. Charge circuit: Check

Renault Clio. Charge circuit: Check

Renault Clio. Charge circuit: Check

Renault Clio. Charge circuit: Check

Renault Clio. Charge circuit: Check

READ NEXT:

 Alternator: Removal - Refitting

K4J, and STANDARD HEATING - K4M, and STANDARD HEATING REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting). Remove the air inlet

 Starter: Removal - Refitting

D4F, and 740 or 742 or 764 REMOVAL I - REMOVAL PREPARATION OPERATION Disconnect the battery (see Battery: Removal - Refitting) (MR 392, 80A, Battery). Remove the air filter unit (see 12A, Fuel mi

 Ignition

SEE MORE:

 Front side door protective strip: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Unclip the blanking cover (1). Remove the bolt. Remove the side mounted indicator (2) using a small flat screwdriver. Disconnect the power supply connector. II - REMOVAL OPERATION FOR PART CONCERNED Slide the door rubbing strip towards the rear

 Transmission

The Renault Clio IV (2014-2019) offers a range of transmission options to suit different driving preferences. Manual transmissions are available with five or six speeds, providing precise and engaging control over gear changes. They allow drivers to optimize engine performance and fuel efficiency.

© 2016-2025 Copyright Renault Clio Owners Club