Renault Clio: K4J or K4M

Renault Clio. Engine wiring

IMPORTANT

Consult the safety and cleanliness advice and operation recommendations before carrying out any repair (see 88A, Wiring harness, Wiring: Precautions for the repair, 88A-5).

WARNING

To prevent damage to the wiring harness when refitting, observe the original routing.

REMOVAL

I - REMOVAL PREPARATION OPERATION

Renault Clio. Engine wiring

II - OPERATION FOR REMOVAL OF PART CONCERNED

WARNING

To prevent any risk of noise, premature wear, short circuits, etc. after the refitting operation, mark the wiring routing and how to connect the connectors.

Renault Clio. Engine wiring

Renault Clio. Engine wiring

JH3 or JR5

Renault Clio. Engine wiring

DP0

Renault Clio. Engine wiring

WARNING

Protect the connector by sliding it into a waterproof plastic bag.

WARNING

To prevent any damage during the removal operation, check that the wiring is free from its mountings (retaining clip, plastic clip, adhesive tape, connector, etc.).

REFITTING

I - REFITTING PREPARATION OPERATION

II - REFITTING OPERATION FOR PART CONCERNED

DP0

JH3 or JR5

 

JH3 or JR5

DP0

 

III - FINAL OPERATION.

READ NEXT:

 K9K

IMPORTANT Consult the safety and cleanliness advice and operation recommendations before carrying out any repair (see 88A, Wiring harness, Wiring: Precautions for the repair, 88A-5). WARNING To preve

 D4F, and 740 or 764

IMPORTANT Consult the safety and cleanliness advice and operation recommendations before carrying out any repair (see 88A, Wiring harness, Wiring: Precautions for the repair, 88A-5). WARNING To preve

 F4R

IMPORTANT Consult the safety and cleanliness advice and operation recommendations before carrying out any repair (see 88A, Wiring harness, Wiring: Precautions for the repair, 88A-5). WARNING To preve

SEE MORE:

 K9K, and 766 or 768

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Disconnect the battery (see Battery: Removal - Refitting) (MR 392, 80A, Battery). Remove: the engine cover, the air inlet duct, the front

 Steering column: List and location of components

VEHICLE WITH KEY Intermediate shaft Steering column adjustment handle Key-operated switch VEHICLE WITH CARD Intermediate shaft Electric steering column lock Steering column adjustment handle Steering column: Removal - Refitting IMPORTANT To avoid any risk of triggering when working on

© 2016-2025 Copyright Renault Clio Owners Club