Renault Clio: D4F

Renault Clio. Timing belt: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

Renault Clio. Timing belt: Removal - Refitting

II - OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Timing belt: Removal - Refitting

Renault Clio. Timing belt: Removal - Refitting

Renault Clio. Timing belt: Removal - Refitting

Renault Clio. Timing belt: Removal - Refitting

Renault Clio. Timing belt: Removal - Refitting

Renault Clio. Timing belt: Removal - Refitting

REFITTING

I - REFITTING PREPARATIONS OPERATION

II - REFITTING OPERATION FOR PART CONCERNED

Renault Clio. Timing belt: Removal - Refitting

Renault Clio. Timing belt: Removal - Refitting

Renault Clio. Timing belt: Removal - Refitting

Renault Clio. Timing belt: Removal - Refitting

Renault Clio. Timing belt: Removal - Refitting

Renault Clio. Timing belt: Removal - Refitting

Renault Clio. Timing belt: Removal - Refitting

Renault Clio. Timing belt: Removal - Refitting

Renault Clio. Timing belt: Removal - Refitting

Renault Clio. Timing belt: Removal - Refitting

Note:

If the tensioning roller is in contact with the cylinder head:

 

III - FINAL OPERATION.

READ NEXT:

 K4M

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (02A, Lifting equipment). Remove: the engine undertray bolts, the engine u

 K9K, and 766 or 768

IMPORTANT Wear protective gloves during the operation. WARNING Never rotate the engine anti-clockwise (timing end). WARNING Do not run the engine without the accessories belt so as not to damage the

 K4J

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (02A, Lifting equipment). Remove: the scuttle panel grille (see Scuttle pane

SEE MORE:

 RENAULT card: battery

Replacing the battery When the message “KEYCARD BATTERY LOW” appears on the instrument panel, replace the RENAULT card battery, press button 1 pulling on emergency key 2, then unclip the cover 3 using tab 4. Remove the battery by pressing on one side (movement A) and by lifting the

 Pressure at end of compression: Check

K9K Remove the heater plugs (see 13C, Preheating, Heater plugs: Removal - Refitting, 13C-2). Disconnect: the pressure regulation solenoid valve connector (1), the flow control solenoid valve connector (2), Fit the hose end piece (Mot. 1592) in place of one of the removed plugs.

© 2016-2025 Copyright Renault Clio Owners Club