Renault Clio: Sender: Removal - Refitting

K9K

Renault Clio. Sender: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

II - OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Sender: Removal - Refitting

WARNING

Refit the sender nut as soon as the sender has been removed to prevent any deformation of the fuel tank.

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

Renault Clio. Sender: Removal - Refitting

II - FINAL OPERATION.

READ NEXT:

 Pump - sender: Removal - Refitting

K9K, and 772 IMPORTANT During this operation, be sure to: beware of fuel splashes when disconnecting the union, protect sensitive areas from fuel outflow. IMPORTANT Wear gloves during this opera

 Pump - sender - filter: Removal - Refitting

D4F or F4R or K4J or K4M or M4R IMPORTANT During this operation, be sure to: be careful of fuel splashes when disconnecting the union. IMPORTANT Wear goggles with side protectors for this operati

 Engine Mounting

SEE MORE:

 To the front seat belts

Depending on the vehicle, they will consist of: front seat belt inertia reel pretensioners; chest-level load limiters; air bags for driver and front passenger. These systems are designed to act independently or together when the vehicle is subjected to a frontal impact. Depending on

 Clutch pedal switch: Removal - Refitting

JH3 or JR5 or TL4, and CRUISE CONTROL - JH3 or JR5 or TL4, and VEHICLE WITH CARD REMOVAL I - REMOVAL PREPARATION OPERATION Remove: the driver side dashboard lower trim clips (1), the driver side dashboard lower trim (2). II - OPERATION FOR REMOVAL OF PART CONCERNED CRUISE CONTROL Dis

© 2016-2025 Copyright Renault Clio Owners Club