Renault Clio: Expansion chamber: Removal - Refitting

Renault Clio. Expansion chamber: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

II - OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Expansion chamber: Removal - Refitting

Note: If the rubber mounting bushes are damaged, mark the position of the support on the body, then replace the " support - rubber mounting bush " assembly.

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

II - FINAL OPERATION.

WARNING

Make sure:

READ NEXT:

 Intermediate pipe: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). II - OPERATION FOR REMOVAL OF PART CONCERNED

 Silencer: Removal - Refitting

D4F or K4J or K4M or K9K or M4R REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Cut the exhau

 Particle filter: Removal - Refitting

K9K, and 772 REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02, Lifting equipment). Disconnect the battery (see Batte

SEE MORE:

 Front anti-roll bar: Removal - Refitting

EQUIPMENT LEVEL E3 LEISURE or EQUIPMENT LEVEL EA1 or EQUIPMENT LEVEL EA2 or EQUIPMENT LEVEL EA3 or EQUIPMENT LEVEL EA4 or EQUIPMENT LEVEL EA5 or EQUIPMENT LEVEL EAG Diameter of the anti-roll bar: 20.5 mm. EQUIPMENT LEVEL EAC or EQUIPMENT LEVEL SPORT Diameter of the anti-roll bar: 19.5 mm. REM

 K9K, and 766 or 768

IMPORTANT Wear protective gloves during the operation. WARNING Never rotate the engine anti-clockwise (timing end). WARNING Do not run the engine without the accessories belt so as not to damage the crankshaft accessories pulley. I - PARTS TO BE SYSTEMATICALLY REPLACED the timing belt, the timin

© 2016-2025 Copyright Renault Clio Owners Club