Renault Clio: Expansion chamber: Removal - Refitting

Renault Clio. Expansion chamber: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

II - OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Expansion chamber: Removal - Refitting

Note: If the rubber mounting bushes are damaged, mark the position of the support on the body, then replace the " support - rubber mounting bush " assembly.

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

II - FINAL OPERATION.

WARNING

Make sure:

READ NEXT:

 Intermediate pipe: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). II - OPERATION FOR REMOVAL OF PART CONCERNED

 Silencer: Removal - Refitting

D4F or K4J or K4M or K9K or M4R REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Cut the exhau

 Tank

SEE MORE:

 Rear Seat Trim

1/3 and 2/3 rear bench seat base trim: Removal - Refitting REMOVAL I - REMOVAL PREPARATION OPERATION Lift up the rear bench seat base. Remove the rear bench seat base at (1). II - OPERATION FOR REMOVAL OF PART CONCERNED Unclip the retaining strips (2). Remove the seat trim and foam.

 Roof sun blind

Fixed sunroof blind Opening: push handle 1 upwards, then guide it until it opens fully; Closing: pull the handle 1 until it clicks into the catch. If the blind becomes skewed when opening or closing, close fully and then fully open the blind. Front sun visor Lower sun visor

© 2016-2025 Copyright Renault Clio Owners Club