Renault Clio: Start button: Removal - Refitting

VEHICLE WITH CARD

Renault Clio. Start button: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

Renault Clio. Start button: Removal - Refitting

RADIO NO. 01 or RADIO NO. 02 or RADIO NO.03 or RADIO NO. 04 or RADIO NO. 05 or RADIO NO.06

NAVIGATION AID 1

WITHOUT NAVIGATION AID, and VEHICLE WITHOUT RADIO

Renault Clio. Start button: Removal - Refitting

Renault Clio. Start button: Removal - Refitting

II - OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Start button: Removal - Refitting

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

II - FINAL OPERATION.

RADIO NO. 01 or RADIO NO. 02 or RADIO NO.03 or RADIO NO. 04 or RADIO NO. 05 or RADIO NO.06

NAVIGATION AID 1

WITHOUT NAVIGATION AID, and VEHICLE WITHOUT RADIO

 

READ NEXT:

 Electric steering column lock: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Lock the airbag computer using the Diagnostic tool to unlock the steering column lock (see Fault finding - Replacement of components) (MR 394, 88C, Airb

 Battery for remote door locking control: Removal - Refitting

REMOVAL OPERATION FOR REMOVAL OF PART CONCERNED VEHICLE WITH KEY Remove the bolt (1). Open the key with a coin (2). VEHICLE WITH CARD Remove the mechanical insert (3). REFITTING I - REFITT

 Card reader: Removal - Refitting

VEHICLE WITH CARD REMOVAL I - REMOVAL PREPARATION OPERATION Remove the centre console (see Centre console: Removal - Refitting) (MR 393, 57A, Interior equipment). Unclip the trim at (1) and (2

SEE MORE:

 Brake servo non-return valve: Removal - Refitting

LEFT-HAND DRIVE REMOVAL I - REMOVAL PREPARATION OPERATION K4J or K4M or K9K Remove the engine cover. II - OPERATION FOR REMOVAL OF PART CONCERNED Disconnect the non-return valve (1) at the servo. Pull and turn the non-return valve to release it from the rubber sealing washer. K9K Disconn

 Flow actuator: Removal - Refitting

K9K, and 750 or 752 or 766 or 768 IMPORTANT Before carrying out any work on the injection system, check using the Diagnostic tool : that the injector rail is not under pressure, that the fuel temperature is not too high. It is essential to respect the safety and cleanliness advice whenever work

© 2016-2025 Copyright Renault Clio Owners Club