Renault Clio: Wheel: Balancing

I - PREREQUISITES FOR WHEEL BALANCING

Driver's perception

II - BALANCING PREPARATION OPERATION

Renault Clio. Wheel: Balancing

Note: The ring is available from the supplier of the equipment used.

Renault Clio. Wheel: Balancing

  1. Steel wheel with flange
  2. Alloy wheel with flange
  3. Alloy wheel without flange

III - PROCEDURE FOR BALANCING THE WHEEL IN QUESTION

Renault Clio. Wheel: Balancing

Renault Clio. Wheel: Balancing

WARNING

To avoid detachment of the balance weights, use only weights which correspond to the vehicle wheel rims.

IV - FINAL OPERATION

READ NEXT:

 Tyres: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (02A, Lifting equipment). Remove: the wheel in question (see 35A, Wheels and ty

 Tyre pressure: Identification

I - INFLATION WARNING If checking the tyre pressure when hot, increase the recommended pressure by 0.2 to 0.3 bar. B85 or C85 or S85 The pressure values given are recommendations when cold. K85 II

 Wheel rim: Identification

IDENTIFICATION 1 - Marking There are two types of identification marking on the wheel rims: engraved marking for steel wheel rims, cast marking for alloy wheel rims. The marking gives the main dim

SEE MORE:

 Pressure sensor: Removal - Refitting

DP0 REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on the two-post lift (see 02A, Lifting equipment, Vehicle: Towing and lifting). Disconnect the battery (see 80A, Battery, Battery: Removal - Refitting). Remove: the front left-hand wheel (see 35A, Wheels and tyres, Wheel:

 Airbag computer: Removal - Refitting

IMPORTANT To avoid any accidents, make sure you are aware of all risks associated with this operation. REMOVAL I - REMOVAL PREPARATION OPERATION IMPORTANT It is essential to lock the airbag computer using the Diagnostic tool before starting the removal. When this function is activated, all the tri

© 2016-2025 Copyright Renault Clio Owners Club