Renault Clio: Rear side door trim: Removal - Refitting
B85 or K85
REMOVAL
I - REMOVAL PREPARATION OPERATION
Special features of vehicles fitted with manual
window winders

- Unclip the winder handle (1) using a pair of unclipping
pliers (protect the door trim).
II - OPERATION FOR REMOVAL OF PART
CONCERNED

- Remove the trim piece and bolt (2).
- Take out interior handle.
- Disconnect the supply connectors (depending on
equipment level).

- Remove the trim piece and bolt (3).

- Remove the bolts (4).
- Remove trim using a pair of unclipping pliers (protect
the door box section).
- Unclip the interior door handle cable using a flat-blade
screwdriver.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
- Reclip:
- the interior door handle cable,
- the door trim.

- Refit:
- the bolts (5),
- the trim piece and bolt (6).

- Reconnect the supply connectors on the window
switch (depending on equipment level).
- Refit:
- the interior handle,
- the trim piece and bolt (7).
II - FINAL OPERATION.
Special features of vehicles fitted with manual
window winders
- Reclip the winder handle.
- Carry out a function test.
Non-side Opening Elements Trim
Tailgate trim: Removal - Refitting
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED

- Remove the bolts (1).
- Unclip the tailgate side trim panels (2).

- Remove the bolts (3).
- Unclip the tailgate trim (4).
REFITTING
REFITTING OPERATION FOR PART CONCERNED
- Clip the tailgate trim in place.
- Refit the bolts (3).
- Clip on the tailgate side trim panels.
- Refit the bolts (1).
READ NEXT:
WITHOUT SPORT SEATS, and DOCUMENTATION PHASE 2
IMPORTANT
Before beginning work on any component of the
safety system, it is essential to lock the airbag computer
using the Diagnostic tool (see Airbag
WITHOUT SPORT SEATS, and DOCUMENTATION PHASE 2
IMPORTANT
Before beginning work on any component of the
safety system, it is essential to lock the airbag computer
using the Diagnostic tool (see Airbag
SEE MORE:
K9K, and JA5
REMOVAL
I - REMOVAL PREPARATION OPERATION
IMPORTANT
Before any operation on the sequential system,
discharge the accumulator using the Diagnostic
tool.
To discharge the accumulator, run command
" Discharge pressure accumulator " AC081.
To confirm the pressure drop, read the " Hydr
EQUIPMENT LEVEL E3 LEISURE or EQUIPMENT LEVEL EA1 or EQUIPMENT LEVEL EA2
or EQUIPMENT
LEVEL EA3 or EQUIPMENT LEVEL EA4 or EQUIPMENT LEVEL EA5 or EQUIPMENT LEVEL EAG
WARNING
Do not use the lower arm for support with a lifting
system.
REMOVAL
I - REMOVAL PREPARATION OPERATION
Position the vehicle
© 2016-2025 Copyright Renault Clio Owners Club
