Renault Clio manuals

Renault Clio: Exhaust gas recirculation: List and location of components

Renault Clio III (2005-2013) Service Manual / Engine And Peripherals / Antipollution / Exhaust gas recirculation: List and location of components

K9K

K9K, and 764 or 766 or 768 or 772

First fitting of the exhaust gas cooler recirculation assembly

Renault Clio. Exhaust gas recirculation: List and location of components

(1) Exhaust gas recirculation solenoid valve
(2) Exhaust gas cooler
(3) Exhaust gas inlet pipe
(4) Metal air inlet tube
(5) Cooler support on the flywheel end
(6) Cooler support on the timing side

Second fitting of the exhaust gas cooler recirculation assembly

Renault Clio. Exhaust gas recirculation: List and location of components

(11) Exhaust gas recirculation solenoid valve
(12) Exhaust gas cooler
(13) Exhaust gas inlet pipe with cooler support, timing end
(14) Cooler support on the flywheel end

K9K, and 750 or 752

Renault Clio. Exhaust gas recirculation: List and location of components

(7) Exhaust gas recirculation solenoid valve
(8) Exhaust gas recirculation mounting
(9) Rigid exhaust gas recirculation pipe
(10) Air inlet metal tube

READ NEXT:

 Exhaust gas recirculation solenoid valve: Removal - Refitting

K9K, and 764 or 766 or 768 REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Disconnect the bat

 Exhaust gas cooler: Removal - Refitting

K9K, and 764 or 766 or 768 or 772 REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Disconnect

 Exhaust gas recirculation unit: Removal - Refitting

K9K, and 750 or 752 REMOVAL Position the vehicle on a two-post lift. Remove the scuttle panel grille (see Scuttle panel grille: Removal - Refitting). Disconnect the exhaust gas recirculation

SEE MORE:

 D4F, and Left-hand Drive

REMOVAL I - REMOVAL PREPARATION OPERATION Put the vehicle on a two-post lift (see Vehicle: Towing and lifting). Disconnect the battery (see Battery: Removal - Refitting). Remove: the non-return valve (1) from the servo, the master cylinder (see 37A, Mechanical component controls, Maste

 Sill panel extension: Removal - Refitting

EQUIPMENT LEVEL EAC or EQUIPMENT LEVEL SPORT REMOVAL OPERATION FOR REMOVAL OF PART CONCERNED Remove the bolts (1). Detach the decorative strip (2). Note: Replace the decorative strip (2) every time it is removed. Remove the bolts (3). Detach the double-sided tape (4) using the (Car.1

© 2016-2025 Copyright Renault Clio Owners Club