Renault Clio: Front driveshaft lower arm ball joint: Check

Renault Clio III (2005-2013) Service Manual / Chassis / Front Axle Components / Front driveshaft lower arm ball joint: Check

CHECK

CHECKING THE FRONT DRIVESHAFT LOWER ARM BALL JOINT

• Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment).

1 - Checking the condition of the front driveshaft lower arm ball joint gaiter

• Check:
  • the gaiter crimping on the front driveshaft lower arm ball joint,
  • that the front driveshaft lower arm ball joint gaiter is not torn.

If the front driveshaft lower arm ball joint gaiter is in poor condition and not crimped, replace the front driveshaft lower arm ball joint (see Front driveshaft lower arm ball joint: Removal - Refitting).

2 - Checking the fitting of the front driveshaft lower arm ball joint

• Check:
  • that the "lower arm ball joint-lower arm bolt-hub carrier" assembly is correctly positioned,
  • the correct positioning of the ring (1) on the front driveshaft lower arm ball joint,
  • the tightening torque (see 30A, General information, Front axle system: Tightening torque, 30A-14).

If the front driveshaft lower arm ball joint is not fitted correctly, replace the front driveshaft lower arm ball joint (see Front driveshaft lower arm ball joint: Removal - Refitting).

3 - Checking the front driveshaft lower arm ball joint clearance

• Check that there is no play in the front driveshaft lower arm ball joint:
  • from a position underneath the vehicle,
  • using both hands, hold the front driveshaft lower arm as close as possible to the wheel,
  • push downwards several times.

  If there is play in the front driveshaft lower arm ball joint, replace the front driveshaft lower arm ball joint (see Front driveshaft lower arm ball joint: Removal - Refitting).

READ NEXT: