Renault Clio: Centre floor front carpet: Removal - Refitting

Renault Clio III (2005-2013) Service Manual / Trim And Upholstery / Body Internal Trim / Centre floor front carpet: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

B85

C85

II - OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Centre floor front carpet: Removal - Refitting

Renault Clio. Centre floor front carpet: Removal - Refitting

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

II - FINAL OPERATION

C85

B85

 

Centre floor rear carpet: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

B85

C85

II - OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Centre floor rear carpet: Removal - Refitting

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

II - FINAL OPERATION

C85

B85

 

Floor carpet: Removal - Refitting

REMOVAL

OPERATION FOR REMOVAL OF PART CONCERNED

REFITTING

REFITTING OPERATION FOR PART CONCERNED

READ NEXT:

 Headlining: Removal - Refitting

IMPORTANT Consult the safety and cleanliness advice and operation recommendations before carrying out any repair (see Airbag and pretensioners: Precautions for the repair) (88C, Airbags and pretensio

 Front door sill lining: Removal - Refitting

B85 or C85 REMOVAL I - REMOVAL PREPARATION OPERATION Partially remove the seal (1). Using a pair of unclipping pliers, unclip the bonnet release catch (2). II - OPERATION FOR REMOVAL OF PART C

 Rear wheel arch trim: Removal - Refitting

B85 or C85 IMPORTANT Consult the safety and cleanliness advice and operation recommendations before carrying out any repair (see Airbag and pretensioners: Precautions for the repair) (88C, Airbags an

SEE MORE:

 Air flowmeter: Removal - Refitting

K9K REMOVAL I - REMOVAL PREPARATION OPERATION Disconnect the battery (see Battery: Removal - Refitting). Loosen the clip (1) between the air duct and the air flowmeter. Disconnect the air flowmeter connector. Unfasten the air duct and remove it. Disconnect the air flowmeter connector. II

 Speed sensor: Removal - Refitting

DP0 Do not drain or remove the automatic gearbox in order to remove the speed sensor. The output speed sensor has been deleted and replaced with wheel speed sensors. REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A,

© 2016-2025 Copyright Renault Clio Owners Club