Renault Clio: M4R

Renault Clio. Engine wiring

IMPORTANT

Consult the safety and cleanliness advice and operation recommendations before carrying out any repair (see 88A, Wiring harness, Wiring: Precautions for the repair, 88A-5).

WARNING

To prevent damage to the wiring harness when refitting, observe the original routing.

REMOVAL

I - REMOVAL PREPARATION OPERATION

Renault Clio. Engine wiring

II - OPERATION FOR REMOVAL OF PART CONCERNED

WARNING

To prevent any risk of noise, premature wear, short circuits, etc. after the refitting operation, mark the wiring routing and how to connect the connectors.

Renault Clio. Engine wiring

Renault Clio. Engine wiring

TL4

Renault Clio. Engine wiring

DP0

Renault Clio. Engine wiring

WARNING

Protect the connector by sliding it into a waterproof plastic bag.

WARNING

To prevent any damage during the removal operation, check that the wiring is free from its mountings (retaining clip, plastic clip, adhesive tape, connector, etc.).

REFITTING

I - REFITTING PREPARATION OPERATION

II - REFITTING OPERATION FOR PART CONCERNED

DP0

TL4

 

TL4

DP0

 

III - FINAL OPERATION.

READ NEXT:

 Dashboard wiring: Connector access

I - LOCATION OF CONNECTORS R251 connector (dashboard wiring/radio + telephone wiring connection). R369 connector (dashboard wiring//multimedia wiring connection). R99 connector (dashboard wi

 Dashboard wiring: Removal - Refitting

LEFT-HAND DRIVE IMPORTANT Consult the safety and cleanliness advice and operation recommendations before carrying out any repair (see 88A, Wiring harness, Wiring: Precautions for the repair, 88A-5).

 Driver's front side door wiring: Removal - Refitting

IMPORTANT Consult the safety and cleanliness advice and operation recommendations before carrying out any repair (see 88A, Wiring harness, Wiring: Precautions for the repair, 88A-5). REMOVAL I - REMOV

SEE MORE:

 Front (chest-level) side airbag: Removal - Refitting

The front chest level side air bag is mounted on the back of each front seat at the door side. When it inflates, the airbag tears open the cover of the module and the foam and unclips the seat cover. IMPORTANT Consult the safety and cleanliness advice and operation recommendations before carrying

 Headlight beam adjustment front sensor: Removal - Refitting

DISCHARGE LAMPS REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Remove: the front wheels (see Wheel: Removal - Refitting) (MR 392, 35A, Wheels and tyres), the front axle subframe (see Front axle s

© 2016-2025 Copyright Renault Clio Owners Club