Renault Clio: Remote headlight beam adjustment actuator: Removal - Refitting

Renault Clio III (2005-2013) Service Manual / Electrical Equipment / Headlights / Remote headlight beam adjustment actuator: Removal - Refitting

DOCUMENTATION PHASE 1

DISCHARGE LAMPS

IMPORTANT

To prevent burns, wait until the " computers - power unit " assemblies are cold before removal.

IMPORTANT

To prevent eye injuries:

REMOVAL

I - REMOVAL PREPARATION OPERATION

DISCHARGE LAMPS

 

II - OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Remote headlight beam adjustment actuator: Removal - Refitting

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

Renault Clio. Remote headlight beam adjustment actuator: Removal - Refitting

Note: The ball joint should not just be in contact with the groove, it should be fitted into it.

II - FINAL OPERATION

DISCHARGE LAMPS

 

DOCUMENTATION PHASE 2

REMOVAL

I - REMOVAL PREPARATION OPERATION

II - OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Remote headlight beam adjustment actuator: Removal - Refitting

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

Renault Clio. Remote headlight beam adjustment actuator: Removal - Refitting

Note: The ball joint should not just be in contact with the groove, it should be fitted into it.

II - FINAL OPERATION

READ NEXT:

 Headlight beam adjustment front sensor: Removal - Refitting

DISCHARGE LAMPS REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Remove: the front wheels (see Wheel:

 Xenon headlight high voltage unit: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION IMPORTANT To prevent eye injuries, do not look at a xenon bulb when lit (lighting voltage of 20,000 V). Wait until the " computer-power unit " assemblies

 Rear Lighting

SEE MORE:

 Sunroof mobile panel: Removal - Refitting

PANORAMIC SUNROOF REMOVAL I - REMOVAL PREPARATION OPERATION Open the moving panel. II - OPERATION FOR REMOVAL OF PART CONCERNED Remove the rear bolts (1) from the mobile panel. Remove: the mobile panel front bolts (2), the mobile panel (this operation requires two people). REFITT

 Exhaust: List and location of components

PIPE ASSEMBLY D4F, and 740 or 742 or 764 (ZC1) cutting area between the catalytic converter and the expansion chamber (ZC2) cutting area between the expansion chamber and the silencer D4F, and 784 or 786 (ZC1) cutting area between the expansion chamber and the silencer K4J (ZC1) cutting area betw

© 2016-2025 Copyright Renault Clio Owners Club