Renault Clio manuals

Renault Clio: Exhaust gas recirculation: List and location of components

Renault Clio III (2005-2013) Service Manual / Engine And Peripherals / Antipollution / Exhaust gas recirculation: List and location of components

K9K

K9K, and 764 or 766 or 768 or 772

First fitting of the exhaust gas cooler recirculation assembly

Renault Clio. Exhaust gas recirculation: List and location of components

(1) Exhaust gas recirculation solenoid valve
(2) Exhaust gas cooler
(3) Exhaust gas inlet pipe
(4) Metal air inlet tube
(5) Cooler support on the flywheel end
(6) Cooler support on the timing side

Second fitting of the exhaust gas cooler recirculation assembly

Renault Clio. Exhaust gas recirculation: List and location of components

(11) Exhaust gas recirculation solenoid valve
(12) Exhaust gas cooler
(13) Exhaust gas inlet pipe with cooler support, timing end
(14) Cooler support on the flywheel end

K9K, and 750 or 752

Renault Clio. Exhaust gas recirculation: List and location of components

(7) Exhaust gas recirculation solenoid valve
(8) Exhaust gas recirculation mounting
(9) Rigid exhaust gas recirculation pipe
(10) Air inlet metal tube

READ NEXT:

 Exhaust gas recirculation solenoid valve: Removal - Refitting

K9K, and 764 or 766 or 768 REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Disconnect the bat

 Exhaust gas cooler: Removal - Refitting

K9K, and 764 or 766 or 768 or 772 REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Disconnect

 Exhaust gas recirculation unit: Removal - Refitting

K9K, and 750 or 752 REMOVAL Position the vehicle on a two-post lift. Remove the scuttle panel grille (see Scuttle panel grille: Removal - Refitting). Disconnect the exhaust gas recirculation

SEE MORE:

 Anti-lock braking system (ABS)

Under heavy braking, the ABS prevents the wheels from locking, allowing the stopping distance to be managed and keeping control of the vehicle. Under these circumstances, the vehicle can be steered to avoid an obstacle whilst braking. In addition, this system can increase stopping distances

 Catalytic converter: Removal - Refitting

K4J or K4M IMPORTANT Catalytic converters contain ceramic fibres: these are contained within a closed unit, and cannot disperse. Cutting or drilling catalytic converters is prohibited. REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lif

© 2016-2025 Copyright Renault Clio Owners Club