Renault Clio: Rear air distribution duct: Removal - Refitting

Renault Clio III (2005-2013) Service Manual / Air Conditioning / Heating / Rear air distribution duct: Removal - Refitting

Renault Clio. Rear air distribution duct: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

Renault Clio. Rear air distribution duct: Removal - Refitting

1 - Rear left-hand air distribution duct

2 - Rear right-hand air distribution duct

II - OPERATION FOR REMOVAL OF PART CONCERNED

1 - Rear left-hand air distribution duct

Renault Clio. Rear air distribution duct: Removal - Refitting

2 - Rear right-hand air distribution duct

Renault Clio. Rear air distribution duct: Removal - Refitting

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

1 - Rear left-hand air distribution duct

Renault Clio. Rear air distribution duct: Removal - Refitting

2 - Rear right-hand air distribution duct

Renault Clio. Rear air distribution duct: Removal - Refitting

II - FINAL OPERATION.

1 - Rear left-hand air distribution duct

2 - Rear right-hand air distribution duct

READ NEXT:

 Recirculation control cable: Removal - Refitting

LEFT-HAND DRIVE, and AIR CONDITIONING or STANDARD HEATING REMOVAL I - REMOVAL PREPARATION OPERATION Partially remove seal (1). Remove the side panel (2). Remove the bolt (3) from the base

 Air distribution cable: Removal - Refitting

LEFT-HAND DRIVE, and AIR CONDITIONING or STANDARD HEATING REMOVAL I - REMOVAL PREPARATION OPERATION Remove: the glovebox (see Glovebox: Removal - Refitting) (MR 393, 57A, Interior equipment),

 Air mixing cable: Removal - Refitting

LEFT-HAND DRIVE, and AIR CONDITIONING or STANDARD HEATING REMOVAL I - REMOVAL PREPARATION OPERATION Partially remove seal (1). Remove the side panel (2). Remove the bolt (3) from the base

SEE MORE:

 Camshaft dephaser: Function

I - SPECIAL NOTES Its role is to modify the valve timing. To improve cylinder filling at all engine speeds, the engine is fitted with an inlet camshaft dephaser (1). Dephasing at the moment when the inlet valves close optimises filling according to engine speed. Torque at midrange engine speed an

 Front seat: Stripping - Rebuilding

WITHOUT SPORT SEATS, and DOCUMENTATION PHASE 1 IMPORTANT Before carrying out any work on a safety or proximity system component, lock the airbag computer using the Diagnostic tool. When this function is activated all the ignition lines are disabled and the airbag warning light on the instrument pan

© 2016-2025 Copyright Renault Clio Owners Club