Renault Clio: Rear panel lining: Removal - Refitting
C85 or S85

REMOVAL
I - REMOVAL PREPARATION OPERATION
- Remove the complete rear bench seat.

- Remove:
- the front seat belt support bolt (1).
- the front seat belt support.

- Unclip:
- the rear section of the front door sill lining (3),
- the rear wing panel trim at (4).
II - OPERATION FOR REMOVAL OF PART
CONCERNED

- Unclip the rear wing panel trim at (7), (8) and (9).
REFITTING
I - REFITTING PREPARATION OPERATION
- Always replace the front seat belt support bolt.
II - REFITTING OPERATION FOR PART
CONCERNED
- Clip on the rear wing panel trim.
C85

- Refit:
- the speaker,
- the bolts (10).

- Clip on the speaker grille.
III - FINAL OPERATION.
- Clip on the front door sill lining.
- Refit the front seat belt support.
- Torque tighten the front seat belt support bolt (21
Nm).
READ NEXT:
REMOVAL
I - REMOVAL PREPARATION OPERATION
C85
Remove the rear wing panel trim (see 71A, Body internal
trim, Rear panel lining: Removal - Refitting, 71A-32).
B85
Unclip the rear inner sill upper
REMOVAL
I - REMOVAL PREPARATION OPERATION
B85 or C85 or S85
Remove the luggage compartment carpet.
K85
Remove the luggage compartment raised floor (1).
Remove the luggage compartment carpe
S85
REMOVAL
I - REMOVAL PREPARATION OPERATION
Remove:
the rear parcel shelf,
the centre rear parcel shelf (1).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
Unclip the clips (2).
Remove
SEE MORE:
The tools included in the tool kit depend
on the vehicle.
Tool kit A is located in the tray under
the luggage compartment carpet.
Lift the cover and remove it.
Wheelbrace 1
Locks or unlocks the wheel bolts and
tow eye 5
Jack 2
Fold it correctly before refitting it in its
housin
Advice on use
In some situations, (air conditioning
off, air recirculation activated, ventilation
speed at zero or low, etc.) you may
notice that condensation starts to form
on the windows and windscreen.
If there is condensation, use the “Clear
View” function to remove it, then use
th
© 2016-2025 Copyright Renault Clio Owners Club
