Renault Clio: Damper valve: Removal - Refitting

K9K

REMOVAL

I - REMOVAL PREPARATION OPERATION

• Disconnect the battery (see Battery: Removal - Refitting)

• Remove:
  • the air inlet duct (1),
  • the damper valve duct (2).

• Remove:
  • the retaining bracket bolts (3),
  • the retaining bracket.

II - OPERATION FOR REMOVAL OF PART CONCERNED

• Remove:
  • the damper valve connector,
  • the damper valve mounting bolts (4),
  • the damper valve.

REFITTING

I - REFITTING PREPARATION OPERATION

• Check the condition of the contact surfaces.

II - REFITTING OPERATION FOR PART CONCERNED

• Refit:
  • a new seal,
  • the damper valve,
  • the damper valve mounting nuts,
  • the connector to the damper valve.
• Torque tighten the damper valve mounting nuts (12 N.m).

III - FINAL OPERATION

• Refit:
  • the damper valve bracket,
  • the damper valve bracket mounting bolts,
  • the damper valve duct,
  • the outer air inlet duct.
• Connect the battery (see Battery: Removal - Refitting).

READ NEXT: