Renault Clio: Parking brake cables: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

DRUM BRAKE

II - OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Parking brake cables: Removal - Refitting

DRUM BRAKE

Renault Clio. Parking brake cables: Removal - Refitting

DISC BRAKE

Renault Clio. Parking brake cables: Removal - Refitting

Renault Clio. Parking brake cables: Removal - Refitting

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

DRUM BRAKE

Renault Clio. Parking brake cables: Removal - Refitting

DISC BRAKE

 

II - FINAL OPERATION.

DRUM BRAKE

 

READ NEXT:

 Brake servo: Check

RIGHT-HAND DRIVE There is no "RENAULT" tool to check the braking assistance circuit. Use a vacuum pump fitted with couplings, part numbers 7701349942 and 7700105874 with hose part number 8200027352

 Anti-lock Braking System

 Hydraulic unit without ESP: Removal - Refitting

LEFT-HAND DRIVE WARNING Prepare for the flow of fluid, and protect the surrounding components. REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towin

SEE MORE:

 F4R, and 830

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Disconnect the battery (see Battery: Removal - Refitting) (MR 392, 80A, Battery). Perform the following operations: drain the engine oil (see

 Right-hand suspended engine mounting: Removal - Refitting

D4F or K9K, and JH3 REMOVAL I - REMOVAL PREPARATION OPERATION Disconnect the battery (see ) (MR 392, 80A, Battery). Remove: the scuttle panel grille (see Scuttle panel grille: Removal - Refitting) (MR 393, 56A, Exterior equipment), the scoop under the scuttle panel grille (see Scoop un

© 2016-2025 Copyright Renault Clio Owners Club