Renault Clio: Centre front panel: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

Renault Clio. Centre front panel: Removal - Refitting

II - OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Centre front panel: Removal - Refitting

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

II - FINAL OPERATION.

READ NEXT:

 Interior rear-view mirror: Removal - Refitting

REMOVAL OPERATION FOR REMOVAL OF PART CONCERNED Unclip: the upper cover, the lower cover. Note: When removing the rear view mirror, be careful not to damage the rain sensor nearby. Disc

 Dashboard cover gaiter: Removal - Refitting

IMPORTANT Before carrying out any work on or near a safety system component, lock the airbag computer using the Diagnostic tool. When this function is activated, all the trigger lines are disabled an

 Safety Accessories

Front seat belt: Removal - Refitting IMPORTANT To avoid any risk of triggering when working on or near a pyrotechnic component (airbags or pretensioners), lock the airbag computer using the diagnosti

SEE MORE:

 Engine oil: Draining - Refilling

D4F or K4J or K4M or K9K I - RECOMMENDATIONS FOR REPAIR Direction of fitting of the drain plug seal. K4J or K4M or K9K For an aluminium engine oil sump There is no direction of fitting for a seal fitted with a rubber lip. D4F For a sheet metal engine oil sump Position the slot (1) of th

 Oxygen sensors: Removal - Refitting

D4F, and 740 WARNING Do not use any product designed to improve electrical contact in the injection computer connectors and oxygen sensors and on the oxygen sensor body. Failure to respect this advice prevents the oxygen sensor from operating correctly and results in failure to comply with the emis

© 2016-2025 Copyright Renault Clio Owners Club