Renault Clio: Rear side door trim: Removal - Refitting
B85 or K85
REMOVAL
I - REMOVAL PREPARATION OPERATION
Special features of vehicles fitted with manual
window winders

- Unclip the winder handle (1) using a pair of unclipping
pliers (protect the door trim).
II - OPERATION FOR REMOVAL OF PART
CONCERNED

- Remove the trim piece and bolt (2).
- Take out interior handle.
- Disconnect the supply connectors (depending on
equipment level).

- Remove the trim piece and bolt (3).

- Remove the bolts (4).
- Remove trim using a pair of unclipping pliers (protect
the door box section).
- Unclip the interior door handle cable using a flat-blade
screwdriver.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
- Reclip:
- the interior door handle cable,
- the door trim.

- Refit:
- the bolts (5),
- the trim piece and bolt (6).

- Reconnect the supply connectors on the window
switch (depending on equipment level).
- Refit:
- the interior handle,
- the trim piece and bolt (7).
II - FINAL OPERATION.
Special features of vehicles fitted with manual
window winders
- Reclip the winder handle.
- Carry out a function test.
Non-side Opening Elements Trim
Tailgate trim: Removal - Refitting
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED

- Remove the bolts (1).
- Unclip the tailgate side trim panels (2).

- Remove the bolts (3).
- Unclip the tailgate trim (4).
REFITTING
REFITTING OPERATION FOR PART CONCERNED
- Clip the tailgate trim in place.
- Refit the bolts (3).
- Clip on the tailgate side trim panels.
- Refit the bolts (1).
READ NEXT:
WITHOUT SPORT SEATS, and DOCUMENTATION PHASE 2
IMPORTANT
Before beginning work on any component of the
safety system, it is essential to lock the airbag computer
using the Diagnostic tool (see Airbag
WITHOUT SPORT SEATS, and DOCUMENTATION PHASE 2
IMPORTANT
Before beginning work on any component of the
safety system, it is essential to lock the airbag computer
using the Diagnostic tool (see Airbag
SEE MORE:
Luggage retaining cross member: Removal - Refitting
I - REMOVAL
1 - REMOVAL PREPARATION OPERATION
Remove the luggage compartment carpet.
Remove the rear bench seat.
Remove the protective carpet of the luggage retaining
cross member.
2 - OPERATION FOR REMOVAL OF PART
CONCERNED
Remove:
th
M4R
The engine and gearbox assembly must be removed
to remove/refit the camshaft dephaser (see
10A, Engine and cylinder block assembly, Engine
- gearbox assembly: Removal - Refitting, 10A-112).
For the camshaft dephaser removal-refitting procedure
(see ) (Technical Note 6020A, 10A, Engine and
© 2016-2025 Copyright Renault Clio Owners Club
