Renault Clio: Rear lighting: List and location of components
Renault Clio III (2005-2013) Service Manual / Electrical Equipment / Rear Lighting / Rear lighting: List and location of components
I - LIST OF COMPONENTS
The rear lighting is composed of:
- the rear lights on the wing (see 81A, Rear lighting, Rear wing light: Removal - Refitting, 81A-5)
- rear light bulbs (see 81A, Rear lighting, Rear light bulb: Removal - Refitting, 81A-7)
- a high-level brake light (see 81A, Rear lighting, 3rd brake light: Removal - Refitting, 81A-10)
- the rear fog lights (see 81A, Rear lighting, Rear fog lights: Removal - Refitting, 81A-14)
- the number plate lights (see 81A, Rear lighting, Number plate light: Removal - Refitting, 81A- 16)
II - LOCATION OF COMPONENTS
B85 or C85 or S85, and DOCUMENTATION PHASE 1
Rear light on wing
Rear light bulbs
- Brake light and side light bulb
- Reversing light bulb
- Direction indicator bulb
- Rear fog light bulb
High level brake light
Rear fog light
Number plate lights
K85, and DOCUMENTATION PHASE 1
Rear lights on the wing
Rear light bulbs
- Brake light and side light bulb
- Direction indicator bulb
- Reversing light bulb
High level brake light
Rear fog lights
Number plate lights
B85 or C85 or S85, and DOCUMENTATION PHASE 2
Rear lights on the wing
Rear light bulbs
- Brake light and side light bulb
- Reversing light bulb
- Direction indicator bulb
High level brake light
Rear fog lights
Number plate lights
READ NEXT:
Rear wing light: Removal - Refitting
B85 or C85 or S85
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED
Open the luggage compartment.
Remove the bolts from the rear wing light (1).
Remove the rear wing light.
Disconnect the connec
Rear light bulb: Removal - Refitting
REMOVAL
I - REMOVAL PREPARATION OPERATION
Remove the rear light on the wing (see 81A, Rear
lighting, Rear wing light: Removal - Refitting, 81A-5).
B85 or C85 or S85, and DOCUMENTATION
PHASE 1
U
3rd brake light: Removal - Refitting
B85 or C85 or S85
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED
Remove the blanking covers (1).
Insert a screwdriver in the openings to move the clips (2).
Apply pressure to the clips (2)
SEE MORE:
Camshaft dephaser:
Function
I - SPECIAL NOTES
Its role is to modify the valve timing.
To improve cylinder filling at all engine speeds, the engine is fitted with an
inlet camshaft dephaser (1).
Dephasing at the moment when the inlet valves close
optimises filling according to engine speed. Torque at
midrange engine speed an
Special features of petrol versions
The following operating conditions:
driving for long periods when the low
fuel level warning light is lit;
using leaded petrol;
using fuel or lubrication additives
which are not approved.
Or operating faults such as:
faulty ignition system, running out of
fuel or disconnected sp
© 2016-2025 Copyright Renault Clio Owners Club
