Renault Clio: C-pillar upper trim: Removal - Refitting

C85

REMOVAL

I - REMOVAL PREPARATION OPERATION

II - REFITTING OPERATION FOR PART CONCERNED

Renault Clio. C-pillar upper trim: Removal - Refitting

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

Renault Clio. C-pillar upper trim: Removal - Refitting

II - FINAL OPERATION

READ NEXT:

 Quarter panel trim: Removal - Refitting

IMPORTANT Consult the safety and cleanliness advice and operation recommendations before carrying out any repair (see Airbag and pretensioners: Precautions for the repair) (88C, Airbags and pretensio

 Rear panel lining: Removal - Refitting

C85 or S85 REMOVAL I - REMOVAL PREPARATION OPERATION Remove the complete rear bench seat. Remove: the front seat belt support bolt (1). the front seat belt support. Unclip: the re

 Rear parcel shelf side trim: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION C85 Remove the rear wing panel trim (see 71A, Body internal trim, Rear panel lining: Removal - Refitting, 71A-32). B85 Unclip the rear inner sill upper

SEE MORE:

 Rear stub axle carrier: Removal - Refitting

DISC BRAKE REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Remove: the rear wheel in question (see 35A, Wheels and tyres, Wheel: Removal - Refitting, 35A-1), the rear brake pads (see 33A,

 Wheel trims - wheel

Remove the wheel trim using hubcap tool 1 (located in the tool kit) by engaging the hook in the opening near valve 2. To refit it, align it with valve 2. Push the retaining hooks in fully, starting with side A near the valve, followed by B and C, finishing at D opposite the valve.

© 2016-2025 Copyright Renault Clio Owners Club