Renault Clio: Soundproofing
Bonnet soundproofing: Removal - Refitting
REMOVAL
REMOVAL OPERATION FOR PART CONCERNED
- Remove clips (1) using a pair of unclipping pliers.
- Remove the bonnet soundproofing.
REFITTING
REFITTING OPERATION FOR PART CONCERNED
- Reposition the bonnet soundproofing.
- Refit the clips (replacing if necessary).
Centre floor side soundproofing: Removal - Refitting
REMOVAL
I - REMOVAL PREPARATION OPERATION
- Remove:
- the entire rear bench seat( (see Complete rear bench seat: Removal - Refitting),
- the front seats( (see Complete front seat: Removal - Refitting),
- the centre console( (see Centre console: Removal - Refitting),
- The front inner sill trims( (see Front door sill lining: Removal - Refitting).
B85
- Detach the rear inner sill trims( (see Rear door sill lining: Removal - Refitting).
C85
- Remove the rear wing panel trim( (see Rear panel trim: Removal - Refitting).
- Take out the rear carpet.
- Take out the front carpet.
II - REMOVAL OPERATION FOR PART CONCERNED
- Remove clip (1).
- Remove the air duct.
- Remove the floor side soundproofing (2).
REFITTING
I - REFITTING OPERATION FOR PART CONCERNED
- Refit:
- the floor side soundproofing,
- the air duct,
- the clip (3).
II - FINAL OPERATION
- Reposition front and rear carpets.
C85
- Refit the rear wing panel trim( (see Rear panel trim: Removal - Refitting).
B85
- Reattach the rear inner sill trims( (see Rear door sill lining: Removal - Refitting).
- Refit:
- the front inner sill trim( (see Front door sill lining: Removal - Refitting),
- the centre console( (see Centre console: Removal - Refitting),
- the entire rear bench seat( (see Complete rear bench seat: Removal - Refitting),
- the front seats( (see Complete front seat: Removal - Refitting).
Centre floor rear soundproofing: Removal - Refitting
REMOVAL
I - REMOVAL PREPARATION OPERATION
- Remove:
- the entire rear bench seat( (see Complete rear bench seat: Removal - Refitting),
- the front seats( (see Complete front seat: Removal - Refitting),
- ( (see Centre console: Removal - Refitting),
- The front inner sill trims( (see Front door sill lining: Removal - Refitting).
B85
- Detach the rear inner sill trims( (see Rear door sill lining: Removal - Refitting).
C85
- Remove the rear wing panel trim( (see Rear panel trim: Removal - Refitting).
- Take out the rear carpet.
II - REMOVAL OPERATION FOR PART CONCERNED
- Remove the centre floor rear soundproofing.
REFITTING
I - REFITTING OPERATION FOR PART CONCERNED
- Reposition the centre floor rear soundproofing.
II - FINAL OPERATION
- Reposition the rear carpet.
C85
- Refit the rear wing panel trim( (see Rear panel trim: Removal - Refitting).
B85
- Reattach the rear inner sill trims( (see Rear door sill lining: Removal - Refitting).
- Refit:
- the front inner sill trims( (see Front door sill lining: Removal - Refitting).
- the centre console( (see Centre console: Removal - Refitting),
- the entire rear bench seat( (see Complete rear bench seat: Removal - Refitting),
- the front seats( (see Complete front seat: Removal - Refitting).
READ NEXT:
Trim And Upholstery
Clio IV (2014-2019) offers a range of trim levels and upholstery options to suit individual preferences and style. The trim levels may vary, offering different levels of features and equipment. The up
Centre floor front carpet: Removal - Refitting
REMOVAL
I - REMOVAL PREPARATION OPERATION
Remove:
the complete rear bench seat,
the front seats (see 75A, Front seat frames and
mechanisms, Complete front seat: Removal -
Refitting, 75A-33),
SEE MORE:
Particle filter: Removal - Refitting
K9K, and 772
REMOVAL
I - REMOVAL PREPARATION OPERATION
Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (MR 392, 02, Lifting equipment).
Disconnect the battery (see Battery: Removal - Refitting)
(MR 392, 80A, Battery).
Remove the engine undertray.
II - OPERATION FOR
Engine cooling system: Check
IMPORTANT
When working in the engine compartment, take
care as the radiator fan(s) may start up unexpectedly
(risk of being cut).
To avoid any risk of serious burns when the engine
is hot:
do not open the expansion bottle cap,
do not drain the cooling system,
do not open the bleed screw(s).
N
© 2016-2025 Copyright Renault Clio Owners Club
