Renault Clio: Damper valve: Removal - Refitting
Renault Clio III (2005-2013) Service Manual / Engine And Peripherals / Fuel Mixture / Damper valve: Removal - Refitting
K9K
REMOVAL
I - REMOVAL PREPARATION OPERATION
- Disconnect the battery (see Battery: Removal - Refitting)
- Remove:
- the air inlet duct (1),
- the damper valve duct (2).
- Remove:
- the retaining bracket bolts (3),
- the retaining bracket.
II - OPERATION FOR REMOVAL OF PART CONCERNED
- Remove:
- the damper valve connector,
- the damper valve mounting bolts (4),
- the damper valve.
REFITTING
I - REFITTING PREPARATION OPERATION
- Check the condition of the contact surfaces.
II - REFITTING OPERATION FOR PART CONCERNED
- Refit:
- a new seal,
- the damper valve,
- the damper valve mounting nuts,
- the connector to the damper valve.
- Torque tighten the damper valve mounting nuts (12 N.m).
III - FINAL OPERATION
- Refit:
- the damper valve bracket,
- the damper valve bracket mounting bolts,
- the damper valve duct,
- the outer air inlet duct.
- Connect the battery (see Battery: Removal - Refitting).
READ NEXT:
Throttle valve: Removal - Refitting
D4F, and 740 or 742 or 764
REMOVAL
I - REMOVAL PREPARATION OPERATION
Disconnect the battery (see Battery: Removal - Refitting).
Remove the air filter unit (see 12A, Fuel mixture,
Air filter unit:
Throttle valve: Cleaning
D4F or F4R or K4J or K4M or M4R
IMPORTANT
Wear leaktight gloves (Nitrile type) for this operation.
IMPORTANT
Always wear protective gear (gloves, goggles and
breathing masks).
Note:
Be sure to work i
Inlet distributor: Removal - Refitting
D4F, and 740 or 742 or 764
REMOVAL
I - REMOVAL PREPARATION OPERATION
Disconnect the battery (see Battery: Removal - Refitting).
Remove the air filter unit (see 12A, Fuel mixture,
Air filter unit:
SEE MORE:
Boot storage
Mobile floor
When fitted to the vehicle, it can be
used to make loading easier.
Note: if you need to access the ISOFIX
ring and/or the net ring at the bottom of
the boot, open flap 3.
Maximum weight for the mobile
floor: 100 kg evenly distributed.
Movable floor storage
Cooling radiator: Removal - Refitting
D4F, and 740 or 742 or 764, and STANDARD HEATING
REMOVAL
I - REMOVAL PREPARATION OPERATION
Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (MR 392, 02A, Lifting equipment).
Disconnect the battery (see Battery: Removal - Refitting)
(MR 392, 80A, Battery).
Remove:
th
© 2016-2025 Copyright Renault Clio Owners Club
