Renault Clio: Diesel injection computer: Configuration

Renault Clio III (2005-2013) Service Manual / Engine And Peripherals / Diesel Injection / Diesel injection computer: Configuration

K9K, and 750 or 752 or 764 or 766 or 768

• To configure the computer, (see MR 394 Fault finding, Diesel Injection, Configuration and programming).

Diesel injection computer: Removal - Refitting

K9K

REMOVAL

I - REMOVAL PREPARATION OPERATION

• Remove:
  • the battery (see Battery: Removal - Refitting) (MR 392, 80A, Battery),
  • the battery heat shield,
  • the air filter box (see 12A, Fuel mixture, Air filter unit: Removal - Refitting, 12A-17).

II - REMOVAL OF PART CONCERNED

• Disconnect the three connectors (1) from the injection computer.
• Remove:
  • the injection computer mounting bolts (2),
  • the injection computer (3).

REFITTING

I - REFITTING PART CONCERNED

• Refit the injection computer.
• Torque tighten the injection computer mounting bolts (10 Nm).

II - FINAL OPERATION.

• Connect the injection computer connectors.
• Refit the air filter box (see 12A, Fuel mixture, Air filter unit: Removal - Refitting, 12A-17).
• Refit the battery heat shield,
• Refit the battery (see Battery: Removal - Refitting) (MR 392, 80A, Battery).

Flow regulation solenoid valve: Removal - Refitting

K9K, and 764 or 772

• The flow regulation solenoid valve (1) is integral with the high pressure pump.
• Replace the " high pressure pump - flow regulation solenoid valve " assembly in the event of a fault in the flow regulation solenoid valve (see 13B, Diesel injection, High pressure pump: Removal - Refitting, 13B-23).

Pressure regulation solenoid valve: Removal - Refitting

K9K, and 764 or 772

• The pressure regulation solenoid valve (1) is integral with the high pressure pump.
• Replace the " high pressure pump - pressure solenoid valve " assembly in the event of a fault in the pressure regulation solenoid valve (see 13B, Diesel injection, High pressure pump: Removal - Refitting, 13B-23).

READ NEXT: