Renault Clio: Headlight: Removal - Refitting

DISCHARGE LAMPS, and DOCUMENTATION PHASE 1

IMPORTANT

To prevent eye injuries:

IMPORTANT

To prevent burns, wait until the " computers - power unit " assemblies are cold before removal.

REMOVAL

I - REMOVAL PREPARATION OPERATION

DISCHARGE LAMPS, and DOCUMENTATION PHASE 1

 

II - OPERATION FOR REMOVAL OF PART CONCERNED

DOCUMENTATION PHASE 1

Renault Clio. Headlight: Removal - Refitting

Renault Clio. Headlight: Removal - Refitting

DOCUMENTATION PHASE 2

Renault Clio. Headlight: Removal - Refitting

Renault Clio. Headlight: Removal - Refitting

 

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

II - FINAL OPERATION

DISCHARGE LAMPS, and DOCUMENTATION PHASE 1

 

READ NEXT:

 Headlight: Adjustment

DOCUMENTATION PHASE 1 ADJUSTMENT I - PREPARATION OPERATION FOR CHECK Place the vehicle in a working area equipped with a two-post lift. Note: Check that the lift is on flat, horizontal ground.

 Headlight bulb: Removal - Refitting

DOCUMENTATION PHASE 1 REMOVAL DISCHARGE LAMPS IMPORTANT To prevent eye injuries: do not look at a xenon bulb when lit (voltage when lit 20000 V), do not light a bulb which has not been fitted into

 Remote headlight beam adjustment actuator: Removal - Refitting

DOCUMENTATION PHASE 1 DISCHARGE LAMPS IMPORTANT To prevent burns, wait until the " computers - power unit " assemblies are cold before removal. IMPORTANT To prevent eye injuries: do not look at a xe

SEE MORE:

 Shock absorber: Removal - Refitting

WARNING To prevent any damage, do not use the rear axle as support for the lifting system. WARNING To prevent any suspension asymmetry, replace both of the shock absorbers on the same axle. WARNING To prevent the components of the rear axle from deteriorating (rubber bushes, brake hoses, etc.) do n

 Bonnet lock: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Remove the front bumper (see 55A, Exterior protection, Front bumper: Removal - Refitting, 55A-1). II - OPERATION FOR REMOVAL OF PART CONCERNED Remove the bonnet catch bolts (1). Remove the clip (2) using offset adjusting pliers. Unclip the sheat

© 2016-2025 Copyright Renault Clio Owners Club