Renault Clio: Opening Element Sealing
Door sealing film: Removal - Refitting
REMOVAL
Note: The sealing film can only be used once; it is destroyed when it is removed.
It is essential to replace the film with a new one each time it is removed.
REMOVING THE SEALING FILM
- Remove the door trim( (see Front side door trim: Removal - Refitting) (MR 393, 72A, Side opening elements trim) or( (see Rear side door trim: Removal - Refitting) (MR 393, 72A, Side opening elements trim).
- Unclip the interior handle mounting (if the vehicle is fitted with one) using an unclipping tool.
1 - First procedure
- Strip off the sealing film using a hot air gun set to approximately
100
READ NEXT:
Window Sealing
Front side door glass run channel: Removal - Refitting
REMOVAL
I - REMOVAL PREPARATION OPERATION
Remove:
the door trim( (see Front side door trim: Removal
- Refitting) (MR 393, 72A, Side opening
Soundproofing
Bonnet soundproofing: Removal - Refitting
REMOVAL
REMOVAL OPERATION FOR PART CONCERNED
Remove clips (1) using a pair of unclipping pliers.
Remove the bonnet soundproofing.
REFITTING
REFITTING OPE
Trim And Upholstery
Clio IV (2014-2019) offers a range of trim levels and upholstery options to suit individual preferences and style. The trim levels may vary, offering different levels of features and equipment. The up
SEE MORE:
Radiator mounting cross member: General description
Note:
The information contained in the following
describes the general repair procedure for all vehicles
having the same design for this part.
Before reading this general information, check that
there are no special notes associated with this vehicle.
These special notes will be specified if appli
Interior trim maintenance
A well-maintained vehicle will last
longer. It is therefore recommended to
maintain the interior of the vehicle regularly.
A stain should always be dealt with
swiftly.
Whatever type of stain is on the trim,
use cold (or warm) soapy water with
natural soap.
Detergents (washing-up liquid
© 2016-2025 Copyright Renault Clio Owners Club
