Renault Clio: Centre floor front carpet: Removal - Refitting
Renault Clio III (2005-2013) Service Manual / Trim And Upholstery / Body Internal Trim / Centre floor front carpet: Removal - Refitting
REMOVAL
I - REMOVAL PREPARATION OPERATION
- Remove:
- the complete rear bench seat,
- the front seats (see 75A, Front seat frames and mechanisms, Complete front seat: Removal - Refitting, 75A-33),
- the centre console (see Centre console: Removal - Refitting),
- the front door sill trims (see 71A, Body internal trim, Front door sill lining: Removal - Refitting, 71A-10).
B85
- Unclip the rear door sill trims (see 71A, Body internal trim, Rear door sill lining: Removal - Refitting, 71A-12).
C85
- Remove the rear wing panel lining (see 71A, Body internal trim, Rear panel lining: Removal - Refitting, 71A-32).
II - OPERATION FOR REMOVAL OF PART CONCERNED
- Pull away the rear carpet.
- Pull away the front carpet.
REFITTING
I - REFITTING OPERATION FOR PART CONCERNED
- Refit the front and rear carpets.
II - FINAL OPERATION
C85
- Refit the rear wing panel lining (see 71A, Body internal trim, Rear panel lining: Removal - Refitting, 71A-32).
B85
- Refit the rear door sill trims (see 71A, Body internal trim, Rear door sill lining: Removal - Refitting, 71A-12).
- Refit:
- the front door sill trims (see 71A, Body internal trim, Front door sill lining: Removal - Refitting, 71A-10).
- the centre console (see Centre console: Removal - Refitting),
- the complete rear bench seat,
- the front seats (see 75A, Front seat frames and mechanisms, Complete front seat: Removal - Refitting, 75A-33).
Centre floor rear carpet: Removal - Refitting
REMOVAL
I - REMOVAL PREPARATION OPERATION
- Remove:
- the complete rear bench seat,
- the front seats (see 75A, Front seat frames and mechanisms, Complete front seat: Removal - Refitting, 75A-33),
- the centre console (see Centre console: Removal - Refitting),
- the front door sill trims (see 71A, Body internal trim, Front door sill lining: Removal - Refitting, 71A-10).
B85
- Unclip the rear door sill trims (see 71A, Body internal trim, Rear door sill lining: Removal - Refitting, 71A-12).
C85
- Remove the rear wing panel lining (see 71A, Body internal trim, Rear panel lining: Removal - Refitting, 71A-32).
II - OPERATION FOR REMOVAL OF PART CONCERNED
- Pull away the rear carpet.
REFITTING
I - REFITTING OPERATION FOR PART CONCERNED
- Refit the rear carpets.
II - FINAL OPERATION
C85
- Refit the rear wing panel lining (see 71A, Body internal trim, Rear panel lining: Removal - Refitting, 71A-32).
B85
- Refit the rear door sill trims (see 71A, Body internal trim, Rear door sill lining: Removal - Refitting, 71A-12).
- Refit:
- the front door sill trims (see 71A, Body internal trim, Front door sill lining: Removal - Refitting, 71A-10).
- the centre console (see Centre console: Removal - Refitting),
- the complete rear bench seat,
- the front seats (see 75A, Front seat frames and mechanisms, Complete front seat: Removal - Refitting, 75A-33).
Floor carpet: Removal - Refitting
REMOVAL
OPERATION FOR REMOVAL OF PART CONCERNED
- Remove:
- the rear centre floor carpet (see 71A, Body internal trim, Centre floor rear carpet: Removal - Refitting, 71A-3),
- the front centre floor carpet (see 71A, Body internal trim, Centre floor front carpet: Removal - Refitting, 71A-1),
REFITTING
REFITTING OPERATION FOR PART CONCERNED
- Refit:
- the rear centre floor carpet (see 71A, Body internal trim, Centre floor rear carpet: Removal - Refitting, 71A-3),
- the front centre floor carpet (see 71A, Body internal trim, Centre floor front carpet: Removal - Refitting, 71A-1),
READ NEXT:
Headlining: Removal - Refitting
IMPORTANT
Consult the safety and cleanliness advice and operation
recommendations before carrying out any
repair (see Airbag and pretensioners: Precautions
for the repair) (88C, Airbags and pretensio
Front door sill lining: Removal - Refitting
B85 or C85
REMOVAL
I - REMOVAL PREPARATION OPERATION
Partially remove the seal (1).
Using a pair of unclipping pliers, unclip the bonnet release catch (2).
II - OPERATION FOR REMOVAL OF PART
C
Rear wheel arch trim: Removal - Refitting
B85 or C85
IMPORTANT
Consult the safety and cleanliness advice and
operation recommendations before carrying out
any repair (see Airbag and pretensioners: Precautions
for the repair) (88C, Airbags an
SEE MORE:
Front driveshaft lower arm: Removal - Refitting
EQUIPMENT LEVEL E3 LEISURE or EQUIPMENT LEVEL EA1 or EQUIPMENT LEVEL EA2
or EQUIPMENT
LEVEL EA3 or EQUIPMENT LEVEL EA4 or EQUIPMENT LEVEL EA5 or EQUIPMENT LEVEL EAG
WARNING
Do not use the lower arm for support with a lifting
system.
REMOVAL
I - REMOVAL PREPARATION OPERATION
Position the vehicle
Front driveshaft lower arm ball joint: Check
CHECK
CHECKING THE FRONT DRIVESHAFT LOWER
ARM BALL JOINT
Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (MR 392, 02A, Lifting equipment).
1 - Checking the condition of the front driveshaft
lower arm ball joint gaiter
Check:
the gaiter crimping on the front drivesha
© 2016-2026 Copyright Renault Clio Owners Club - 0.0036
