Renault Clio: Sequential gearbox converter: Removal - Refitting

K9K, and JA5

REMOVAL

I - REMOVAL PREPARATION OPERATION

• Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment).
• Disconnect the battery (see Battery: Removal - Refitting) (MR 392, 80A, Battery).
• Remove:
  • the front left-hand wheel (see Wheel: Removal - Refitting) (MR 392, 35A, Wheels and tyres),
  • the front wheel arch liner (see Front wheel arch liner: Removal - Refitting) (MR 393, 55A, Wheel arch liner).

II - OPERATION FOR REMOVAL OF PART CONCERNED

• Remove:
  • the retaining belt (1) from the sequential gearbox computer,
  • the sequential gearbox computer connector (2),
  • the sequential gearbox computer (3).

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

• Refit:
  • the sequential gearbox computer,
  • the sequential gearbox computer connector,
  • the retaining belt from the sequential gearbox computer,

II - FINAL OPERATION.

• Refit:
  • the front wheel arch liner (see Front wheel arch liner: Removal - Refitting) (MR 393, 55A, Wheel arch liner).
  • the front left-hand wheel (see Wheel: Removal - Refitting) (MR 392, 35A, Wheels and tyres),
• Connect the battery (see Battery: Removal - Refitting) (MR 392, 80A, Battery).
• Carry out the necessary programming (see Fault finding - Replacement of components) (MR 394, 21B, Sequential gearbox).

REMOVAL

I - REMOVAL PREPARATION OPERATION

• Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment).
• Disconnect the battery (see Battery: Removal - Refitting) (MR 392, 80A, Battery).
• Remove:
  • the front left-hand wheel (see Wheel: Removal - Refitting) (MR 392, 35A, Wheels and tyres),
  • the front wheel arch liner (see Front wheel arch liner: Removal - Refitting) (MR 393, 55A, Wheel arch liner).

II - OPERATION FOR REMOVAL OF PART CONCERNED

• Remove:
  • the retaining belt (1) from the sequential gearbox computer,
  • the sequential gearbox computer connector (2),
  • the sequential gearbox computer (3).

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

• Refit:
  • the sequential gearbox computer,
  • the sequential gearbox computer connector,
  • the retaining belt from the sequential gearbox computer,

II - FINAL OPERATION.

• Refit:
  • the front wheel arch liner (see Front wheel arch liner: Removal - Refitting) (MR 393, 55A, Wheel arch liner).
  • the front left-hand wheel (see Wheel: Removal - Refitting) (MR 392, 35A, Wheels and tyres),
• Connect the battery (see Battery: Removal - Refitting) (MR 392, 80A, Battery).
• Carry out the necessary programming (see Fault finding - Replacement of components) (MR 394, 21B, Sequential gearbox).

READ NEXT: