Renault Clio: Air filter: Removal - Refitting
Renault Clio III (2005-2013) Service Manual / Engine And Peripherals / Fuel Mixture / Air filter: Removal - Refitting
D4F, and 740 or 742 or 764
REMOVAL
I - REMOVAL PREPARATION OPERATION
- Remove the air filter unit (see 12A, Fuel mixture, Air filter unit: Removal - Refitting, 12A-17).
II - OPERATION FOR REMOVAL OF PART CONCERNED
- Remove:
- the mounting bolts (1) from the air filter unit cover,
- the air filter.
REFITTING
I - REFITTING PREPARATION OPERATION
- Clean the air filter housing.
II - REFITTING OPERATION FOR PART CONCERNED
- Refit:
- the air filter,
- the bolts mounting the air filter unit cover.
III - FINAL OPERATION.
- Refit the air filter unit (see 12A, Fuel mixture, Air filter unit: Removal - Refitting, 12A-17).
F4R or K4J or K4M or K9K or M4R - D4F, and 784 or 786
REMOVAL
I - REMOVAL PREPARATION OPERATION
- Remove the air filter cover in the order of the arrows as shown above.
II - OPERATION FOR REMOVAL OF PART CONCERNED
- Remove:
- the air filter (3) in the order of the arrows as shown above,
- the air filter from the air filter unit.
REFITTING
I - REFITTING PREPARATION OPERATION
- Clean the air filter unit.
II - REFITTING OPERATION FOR THE PART IN QUESTION
- Reinsert the air filter into the air filter unit correctly.
WARNING
If the air filter is fitted incorrectly in the air filter unit, unfiltered air may enter the engine.
- Press down firmly on the air filter and then pull it down.
III - FINAL OPERATION
- Refit the cover on the air filter unit.
READ NEXT:
Air filter unit: Removal - Refitting
D4F, and 740 or 742 or 764
REMOVAL
I - REMOVAL PREPARATION OPERATION
Apply pressure to (1).
Pull at (2).
Remove the air breather sleeve (3) from the front
end panel.
Undo the clip (4) mounti
Air flowmeter: Removal - Refitting
K9K
REMOVAL
I - REMOVAL PREPARATION OPERATION
Disconnect the battery (see Battery: Removal - Refitting).
Loosen the clip (1) between the air duct and the air
flowmeter.
Disconnect the air flow
Damper valve: Removal - Refitting
K9K
REMOVAL
I - REMOVAL PREPARATION OPERATION
Disconnect the battery (see Battery: Removal - Refitting)
Remove:
the air inlet duct (1),
the damper valve duct (2).
Remove:
the reta
SEE MORE:
Maintenance and anti-pollution advice
Your vehicle complies with criteria for
recycling and recovering vehicles at the
end of their service life which will come
into force in 2015.
Some parts of your vehicle have therefore
been designed to facilitate future
recycling.
These parts are easy to remove so
that they can be recove
Environment
Your vehicle has been designed with
respect for the environment in mind for
its entire service life: during production,
use and at the end of its life.
This commitment is illustrated by the of
the manufacturer eco² signature.
Manufacture
Your vehicle has been manufactured at
a factory
© 2016-2026 Copyright Renault Clio Owners Club - 0.0033
