{MAINCONT}

Renault Clio: Speed sensor: Removal - Refitting

DP0

Renault Clio. Speed sensor: Removal - Refitting

Do not drain or remove the automatic gearbox in order to remove the speed sensor.

The output speed sensor has been deleted and replaced with wheel speed sensors.

REMOVAL

I - REMOVAL PREPARATION OPERATION

Renault Clio. Speed sensor: Removal - Refitting

II - REMOVAL OPERATION FOR THE PART CONCERNED

Renault Clio. Speed sensor: Removal - Refitting

Renault Clio. Speed sensor: Removal - Refitting

Renault Clio. Speed sensor: Removal - Refitting

WARNING

Protect the connector by sliding it into a waterproof plastic bag.

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

II - FINAL OPERATION

READ NEXT:

 Pressure sensor: Removal - Refitting

DP0 REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on the two-post lift (see 02A, Lifting equipment, Vehicle: Towing and lifting). Disconnect the battery (see 80A, Battery, Batter

 Hydraulic distributor: Removal - Refitting

DP0 REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Shift the selector lever to Neutral. Dis

 Flow control solenoid valve: Removal - Refitting

DP0 Do not drain or remove the automatic gearbox in order to remove the flow control solenoid valve REMOVAL I - REMOVAL PREPARATION OPERATION Place the vehicle on a two-post lift (see 02A, Lifting

SEE MORE:

  Accelerometer: Removal - Refitting

K9K, and 750 or 752 or 760 or 762 or 766 or 768 Note: Vehicles equipped with the K9K*768 engine may or may not be equipped with an intercooler. REMOVAL I - REMOVAL PREPARATION OPERATION Remove the front engine cover. Disconnect the battery (see Battery: Removal - Refitting) (MR 392, 80A, Batter

  Crankshaft position sensor: Removal - Refitting

K9K, and 764 or 766 or 768 REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting). Disconnect the battery (see Battery: Removal - Refitting). Remove the engine undertray. II - OPERATION FOR REMOVAL OF PART CONCERNED Disconnect th

{VIDEOCONT}
© 2016-2026 Copyright Renault Clio Owners Club - 0.0042