Renault Clio: C-pillar upper trim: Removal - Refitting
C85
REMOVAL
I - REMOVAL PREPARATION OPERATION
- Remove:
- the rear wing panel lining (see 71A, Body internal
trim, Rear panel lining: Removal - Refitting, 71A-32),
- the rear roof drip moulding lining (see 71A, Body
internal trim, Side roof rail rear trim: Removal -
Refitting, 71A-17),
- the rear quarter panel lining (see 71A, Body internal
trim, Quarter panel trim: Removal - Refitting, 71A-27).
II - REFITTING OPERATION FOR PART
CONCERNED

- Remove clips (1) using a pair of unclipping pliers.
- Remove the C-pillar upper trim.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED

- Refit:
- the C-pillar upper trim,
- clips (2).
II - FINAL OPERATION
- Remove:
- the rear wing panel lining (see 71A, Body internal
trim, Rear panel lining: Removal - Refitting, 71A-32),
- the rear quarter panel lining (see 71A, Body internal
trim, Quarter panel trim: Removal - Refitting, 71A-27),
- the rear roof drip moulding lining (see 71A, Body
internal trim, Side roof rail rear trim: Removal -
Refitting, 71A-17).
READ NEXT:
IMPORTANT
Consult the safety and cleanliness advice and operation
recommendations before carrying out any
repair (see Airbag and pretensioners: Precautions
for the repair) (88C, Airbags and pretensio
C85 or S85
REMOVAL
I - REMOVAL PREPARATION OPERATION
Remove the complete rear bench seat.
Remove:
the front seat belt support bolt (1).
the front seat belt support.
Unclip:
the re
REMOVAL
I - REMOVAL PREPARATION OPERATION
C85
Remove the rear wing panel trim (see 71A, Body internal
trim, Rear panel lining: Removal - Refitting, 71A-32).
B85
Unclip the rear inner sill upper
SEE MORE:
K9K, and 764 or 772
Disconnect the battery (see Battery: Removal - Refitting)
(MR 392, 80A, Battery).
Disconnect the inlet pressure sensor (1).
Remove:
the air duct (2) between the air filter and the intercooler,
the air duct (3) between the intercooler and the turbocharger.
Un
F4R or K4J or K4M or K9K or M4R, and LEFT-HAND DRIVE
WARNING
Prepare for brake fluid outflow, to prevent damage
to the mechanical parts and bodywork around the
braking system.
REMOVAL
I - REMOVAL PREPARATION OPERATION
Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (MR
© 2016-2025 Copyright Renault Clio Owners Club
