Renault Clio: Centre floor front carpet: Removal - Refitting
Renault Clio III (2005-2013) Service Manual / Trim And Upholstery / Body Internal Trim / Centre floor front carpet: Removal - Refitting
REMOVAL
I - REMOVAL PREPARATION OPERATION
- Remove:
- the complete rear bench seat,
- the front seats (see 75A, Front seat frames and mechanisms, Complete front seat: Removal - Refitting, 75A-33),
- the centre console (see Centre console: Removal - Refitting),
- the front door sill trims (see 71A, Body internal trim, Front door sill lining: Removal - Refitting, 71A-10).
B85
- Unclip the rear door sill trims (see 71A, Body internal trim, Rear door sill lining: Removal - Refitting, 71A-12).
C85
- Remove the rear wing panel lining (see 71A, Body internal trim, Rear panel lining: Removal - Refitting, 71A-32).
II - OPERATION FOR REMOVAL OF PART CONCERNED
- Pull away the rear carpet.
- Pull away the front carpet.
REFITTING
I - REFITTING OPERATION FOR PART CONCERNED
- Refit the front and rear carpets.
II - FINAL OPERATION
C85
- Refit the rear wing panel lining (see 71A, Body internal trim, Rear panel lining: Removal - Refitting, 71A-32).
B85
- Refit the rear door sill trims (see 71A, Body internal trim, Rear door sill lining: Removal - Refitting, 71A-12).
- Refit:
- the front door sill trims (see 71A, Body internal trim, Front door sill lining: Removal - Refitting, 71A-10).
- the centre console (see Centre console: Removal - Refitting),
- the complete rear bench seat,
- the front seats (see 75A, Front seat frames and mechanisms, Complete front seat: Removal - Refitting, 75A-33).
Centre floor rear carpet: Removal - Refitting
REMOVAL
I - REMOVAL PREPARATION OPERATION
- Remove:
- the complete rear bench seat,
- the front seats (see 75A, Front seat frames and mechanisms, Complete front seat: Removal - Refitting, 75A-33),
- the centre console (see Centre console: Removal - Refitting),
- the front door sill trims (see 71A, Body internal trim, Front door sill lining: Removal - Refitting, 71A-10).
B85
- Unclip the rear door sill trims (see 71A, Body internal trim, Rear door sill lining: Removal - Refitting, 71A-12).
C85
- Remove the rear wing panel lining (see 71A, Body internal trim, Rear panel lining: Removal - Refitting, 71A-32).
II - OPERATION FOR REMOVAL OF PART CONCERNED
- Pull away the rear carpet.
REFITTING
I - REFITTING OPERATION FOR PART CONCERNED
- Refit the rear carpets.
II - FINAL OPERATION
C85
- Refit the rear wing panel lining (see 71A, Body internal trim, Rear panel lining: Removal - Refitting, 71A-32).
B85
- Refit the rear door sill trims (see 71A, Body internal trim, Rear door sill lining: Removal - Refitting, 71A-12).
- Refit:
- the front door sill trims (see 71A, Body internal trim, Front door sill lining: Removal - Refitting, 71A-10).
- the centre console (see Centre console: Removal - Refitting),
- the complete rear bench seat,
- the front seats (see 75A, Front seat frames and mechanisms, Complete front seat: Removal - Refitting, 75A-33).
Floor carpet: Removal - Refitting
REMOVAL
OPERATION FOR REMOVAL OF PART CONCERNED
- Remove:
- the rear centre floor carpet (see 71A, Body internal trim, Centre floor rear carpet: Removal - Refitting, 71A-3),
- the front centre floor carpet (see 71A, Body internal trim, Centre floor front carpet: Removal - Refitting, 71A-1),
REFITTING
REFITTING OPERATION FOR PART CONCERNED
- Refit:
- the rear centre floor carpet (see 71A, Body internal trim, Centre floor rear carpet: Removal - Refitting, 71A-3),
- the front centre floor carpet (see 71A, Body internal trim, Centre floor front carpet: Removal - Refitting, 71A-1),
READ NEXT:
Headlining: Removal - Refitting
IMPORTANT
Consult the safety and cleanliness advice and operation
recommendations before carrying out any
repair (see Airbag and pretensioners: Precautions
for the repair) (88C, Airbags and pretensio
Front door sill lining: Removal - Refitting
B85 or C85
REMOVAL
I - REMOVAL PREPARATION OPERATION
Partially remove the seal (1).
Using a pair of unclipping pliers, unclip the bonnet release catch (2).
II - OPERATION FOR REMOVAL OF PART
C
Rear wheel arch trim: Removal - Refitting
B85 or C85
IMPORTANT
Consult the safety and cleanliness advice and
operation recommendations before carrying out
any repair (see Airbag and pretensioners: Precautions
for the repair) (88C, Airbags an
SEE MORE:
Throttle valve: Cleaning
D4F or F4R or K4J or K4M or M4R
IMPORTANT
Wear leaktight gloves (Nitrile type) for this operation.
IMPORTANT
Always wear protective gear (gloves, goggles and
breathing masks).
Note:
Be sure to work in a clean environment so as not to
allow any contamination of the throttle valve.
CLEANING
I - CLEAN
Camshaft dephaser:
Removal - Refitting
M4R
The engine and gearbox assembly must be removed
to remove/refit the camshaft dephaser (see
10A, Engine and cylinder block assembly, Engine
- gearbox assembly: Removal - Refitting, 10A-112).
For the camshaft dephaser removal-refitting procedure
(see ) (Technical Note 6020A, 10A, Engine and
© 2016-2025 Copyright Renault Clio Owners Club
