Renault Clio: Opening Element Sealing

Renault Clio III (2005-2013) Service Manual / Sealing And Soundproofing / Opening Element Sealing

Door sealing film: Removal - Refitting

REMOVAL

Note: The sealing film can only be used once; it is destroyed when it is removed.

It is essential to replace the film with a new one each time it is removed.

REMOVING THE SEALING FILM

Remove the door trim( (see Front side door trim: Removal - Refitting) (MR 393, 72A, Side opening elements trim) or( (see Rear side door trim: Removal - Refitting) (MR 393, 72A, Side opening elements trim).

Renault Clio. Door sealing film: Removal - Refitting

Unclip the interior handle mounting (if the vehicle is fitted with one) using an unclipping tool.

1 - First procedure

Strip off the sealing film using a hot air gun set to approximately 100

SEE MORE:

Petrol injection: List and location of components

D4F, and 740 or 742 or 764 Petrol vapour rebreathing solenoid valve Air inlet pressure sensor Motorised throttle valve Injection computer (5) Fuel injection computer (6) Motorised throttle valve (7) Fuel vapour recirculation solenoid valve (8) Ignition coil (9) Upstream oxygen sensor (1

Front brake calliper: Removal - Refitting

EQUIPMENT LEVEL E3 LEISURE or EQUIPMENT LEVEL EA1 or EQUIPMENT LEVEL EA2 or EQUIPMENT LEVEL EA3 or EQUIPMENT LEVEL EA4 or EQUIPMENT LEVEL EA5 or EQUIPMENT LEVEL EAG Note: The callipers supplied as replacement parts are pre-filled. REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on

Renault Clio: Opening Element Sealing

READ NEXT:

Window Sealing

Soundproofing

Trim And Upholstery

SEE MORE:

Petrol injection: List and location of components

Front brake calliper: Removal - Refitting