{MAINCONT}

Renault Clio: Charge circuit: Specifications

D4F or F4R or K4J or K4M or K9K or M4R

ALTERNATOR SPECIFICATIONS

Renault Clio. Charge circuit: Specifications

Charge circuit: Function

D4F or F4R or K4J or K4M or K9K or M4R

OPERATION

These vehicles are fitted with a built-in regulator and an instrument panel warning light which operates as follows:

Charge circuit: Check

D4F or F4R or K4J or K4M or K9K or M4R

Check the current after 30 minutes of heating at a voltage of 13.5 V.

Renault Clio. Charge circuit: Check

Renault Clio. Charge circuit: Check

Renault Clio. Charge circuit: Check

Renault Clio. Charge circuit: Check

Renault Clio. Charge circuit: Check

READ NEXT:

 Alternator: Removal - Refitting

K4J, and STANDARD HEATING - K4M, and STANDARD HEATING REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting). Remove the air inlet

 Starter: Removal - Refitting

D4F, and 740 or 742 or 764 REMOVAL I - REMOVAL PREPARATION OPERATION Disconnect the battery (see Battery: Removal - Refitting) (MR 392, 80A, Battery). Remove the air filter unit (see 12A, Fuel mi

 Ignition

SEE MORE:

  Sender: Removal - Refitting

K9K REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02, Lifting equipment). Drain the fuel tank (see 19C, Tank, Fuel tank: Draining, 19C-8). Remove the battery covers. Disconnect the battery (see Battery: Removal - R

  Pump - sender: Removal - Refitting

K9K, and 772 IMPORTANT During this operation, be sure to: beware of fuel splashes when disconnecting the union, protect sensitive areas from fuel outflow. IMPORTANT Wear gloves during this operation. IMPORTANT Wear goggles with side protectors for this operation. REMOVAL I - REMOVAL PREPARATIO

{VIDEOCONT}
© 2016-2026 Copyright Renault Clio Owners Club - 0.0044