Renault Clio: Front side door protective strip: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

• Unclip the blanking cover (1).
• Remove the bolt.

• Remove the side mounted indicator (2) using a small flat screwdriver.
• Disconnect the power supply connector.

II - REMOVAL OPERATION FOR PART CONCERNED

• Slide the door rubbing strip towards the rear of the vehicle.

III - REFITTING OPERATION FOR PART CONCERNED

• Slide the door moulding towards the front of the vehicle.

IV - FINAL OPERATION.

• Refit:
  • the protective strip mounting bolt,
  • the blanking cover,
  • the mounted indicator.

Rear side door protective strip: Removal - Refitting

B85 or K85

REMOVAL

I - REMOVAL PREPARATION OPERATION

• Strip off the adhesive (1).
• Remove the bolt.

II - OPERATION FOR REMOVAL OF PART CONCERNED

• Slide the door moulding towards the front of the vehicle.

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

• Slide the door moulding towards rear of the vehicle.

II - FINAL OPERATION.

• Refit:
  • the protective strip mounting bolt,
  • the adhesives (Part no: 77 01 465 890).

C85 or S85

REMOVAL

OPERATION FOR REMOVAL OF PART CONCERNED

• Unclip the rear wing protective strip (1).

REFITTING

I - REFITTING PREPARATION OPERATION

• Check the condition of the clips and replace them if necessary.

II - REFITTING OPERATION FOR PART CONCERNED

• Clip on the rear wing protective strip.

Roof protection strip: Removal - Refitting

C85 or S85

REMOVAL

Note: It is possible to replace the access flap for mounting the roof rack bars.

OPERATION FOR REMOVAL OF PART CONCERNED

• Carefully unclip the roof protection strip.

REFITTING

I - REMOVAL PREPARATION OPERATION

• Check the condition of the clips (1) and replace if necessary.

II - FINAL OPERATION.

• Clip the roof protection strip in position.

READ NEXT: