Renault Clio: Transponder ring: Removal - Refitting

VEHICLE WITH KEY

REMOVAL

I - REMOVAL PREPARATION OPERATION

• Unclip trim (1).

• Remove:
  • the plasti-rivet (2),
  • the bolt (3).

• Remove the door seal.
• Unclip the dashboard side face (4).

• Remove:
  • the bolt (5),
  • the dashboard lower trim (6).

• Remove the lower cover (7).
• Disconnect the connectors.

• Remove the bolts (8) under the lower half cowling.
• Unclip the lower and upper half cowling.

• Remove the bolts (8) under the lower half cowling.
• Unclip the lower and upper half cowling.

II - OPERATION FOR REMOVAL OF PART CONCERNED

• Unclip the two antenna/transponder ring tabs (10).
• Remove the antenna/transponder ring.
• Disconnect the connector (9).

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

• Clip on the antenna/transponder ring.
• Connect the antenna/transponder ring connector.

II - FINAL OPERATION

• Refit the lower half-shell.
• Clip the upper half cowling onto the lower half cowling.
• Tighten the bolts (8) under the lower half cowling.
• Connect the connectors on the lower cover (7).
• Refit the lower cover (7).
• Tighten the bolts (3), (5).
• Clip on:
  • the plastic rivet,
  • the dashboard side panel,
  • the trim (1),
  • the door seal,
  • the dashboard lower trim (6).

READ NEXT: