Renault Clio: Crankshaft accessories pulley: Removal - Refitting

D4F, and 740 or 742 or 764

REMOVAL

I - REMOVAL PREPARATION OPERATION

• Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment).
• Remove:
  • the front right-hand wheel (see Wheel: Removal - Refitting) (MR 392, 35A, Wheels and tyres),
  • the front right-hand wheel arch liner (see Front wheel arch liner: Removal - Refitting) (MR 393, 55A, Exterior protection),
  • the accessories belt (see 11A, Top and front of engine, Accessories belt: Removal - Refitting, 11A-5).

II - OPERATION FOR REMOVAL OF PART CONCERNED

• Remove:
  • the flywheel cover mounting bolt (1),
  • the flywheel cover.

• Fit the immobilising tool (Mot. 582-01) (2).
• Remove:
  • the accessories pulley mounting bolt,
  • the accessories pulley.

REFITTING

I - REFITTING PREPARATION OPERATION

WARNING

You must replace the crankshaft accessories pulley mounting bolt.

• Clean the crankshaft accessories pulley grooves with a wire brush to ensure there are no deposits.

II - REFITTING OPERATION FOR PART CONCERNED

• Refit the crankshaft accessories pulley using a new bolt.
• Torque tighten the crankshaft accessories pulley mounting bolt (40 N.m + 70

  READ NEXT:

   Timing belt: Removal - Refitting

   D4F

  REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Disconnect the battery (see Battery: Removal

   K4M

  REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (02A, Lifting equipment). Remove: the engine undertray bolts, the engine u

  SEE MORE:

    Airbag and pretensioners: List and location of components

  I - LISTS OF COMPONENTS list of components Driver and passenger front airbags (1). C85 or S85 Anti-submarining airbags located in the base of the front seats (2). B85 or K85 Front buckle pretensioners located on the outside of the seat (3). FRONT SIDE AIRBAG Front chest-level side airbag located in

    Airbag and pretensioners: Precautions for the repair

  I - PRECAUTIONS FOR REPAIR IMPORTANT All operations on airbag and pretensioner systems must be carried out by qualified trained personnel. The airbags have a pyrotechnic gas generator, with an ignition module and bag which must not be separated. The pretensioners have a pyrotechnic gas generator