Renault Clio: Electric Windows - Sunroof

Electric window: List and location of components

ELECTRIC FRONT WINDOW or ONE-TOUCH ELECTRIC FRONT WINDOW or PASSENGER ELECTRIC ONETOUCH WINDOW CONTROL, and ELECTRIC REAR WINDOW

1. UCH
2. Driver's window lift switch board
3. Passenger window lift switch board
4. Rear window lift switch board

I - UCH

UCH (1)

II - DRIVER'S WINDOW LIFT SWITCH BOARD

Driver's window lift switch board (2)

III - PASSENGER WINDOW LIFT SWITCH BOARD

Passenger window lift switch board (3)

IV - REAR WINDOW LIFT SWITCH BOARD

Rear window lift switch board (4)

Front electric window switches on driver's door: Removal - Refitting

ELECTRIC FRONT WINDOW or ONE-TOUCH ELECTRIC FRONT WINDOW or PASSENGER ELECTRIC ONETOUCH WINDOW CONTROL

REMOVAL

I - REMOVAL PREPARATION OPERATION

• Remove the driver's front side door trim (see Front side door trim: Removal - Refitting) (72A, Side opening element trim).

II - OPERATION FOR REMOVAL OF PART CONCERNED

• Remove the board by moving clips (1) and (2).

• Unclip the front electric window switches by pressing on the clips (3).
• Unclip the rear electric window switches by pressing on the clips (4).

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

• Refit:
  • the electric window switches onto the plate,
  • the plate onto the front side door trim.

II - FINAL OPERATION.

• Refit the driver's front side door trim (see Front side door trim: Removal - Refitting) (72A, Side opening element trim).

Front electric window switch on passenger door: Removal - Refitting

ELECTRIC FRONT WINDOW or ONE-TOUCH ELECTRIC FRONT WINDOW or PASSENGER ELECTRIC ONETOUCH WINDOW CONTROL

The front electric window switch (passenger side) is clipped to a plate.

The plate is clipped to the door trim.

REMOVAL

OPERATION FOR REMOVAL OF PART CONCERNED

• Unclip the upper section (1) of the door handle using the (Car. 1363).
• Disconnect the front electric window switch connector.

• Unclip the front window switch from the door handle upper section by pressing the clips (2).
• Remove the front door switch from the passenger door.

REFITTING

REFITTING OPERATION FOR PART CONCERNED

• Clip the front window switch on the door handle upper section.
• Connect the front electric window switch connector.
• Clip on the upper section of the door handle.

Rear electric window switch: Removal - Refitting

B85 or K85, and ELECTRIC REAR WINDOW

REMOVAL

OPERATION FOR REMOVAL OF PART CONCERNED

• Remove:
  • the blanking cover using a small flat-blade screwdriver,
  • the board mounting bolt.
• Extract the board towards the front.
• Disconnect the connector.

REFITTING

REFITTING OPERATION FOR PART CONCERNED

• Connect the connector.
• Refit the board inserting it from the rear.
• Refit:
  • the board mounting bolt,
  • the blanking cover.

Child safety switch: Removal - Refitting

B85 or K85, and ELECTRIC REAR WINDOW

REMOVAL

I - REMOVAL PREPARATION OPERATION

• Remove the driver's front side door trim (see Front side door trim: Removal - Refitting) (72A, Side opening element trim).

II - OPERATION FOR REMOVAL OF PART CONCERNED

• Remove the board by moving clips (1) and (2).

• Remove the child safety switch by pressing on the clips (3).

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

• Refit:
  • the child safety switch on the plate,
  • the plate onto the front side door trim.

II - FINAL OPERATION.

• Remove the driver's front side door trim (see Front side door trim: Removal - Refitting) (72A, Side opening element trim).

Electric sunroof: List and location of components

PANORAMIC SUNROOF

1. UCH
2. Sunroof mobile glass
3. Sunroof open and close switch
4. Sunroof motor/computer

I - UCH

UCH (1).

II - SUNROOF MOBILE GLASS

Sunroof mobile glass (2).

III - SUNROOF OPEN AND CLOSE SWITCH

Sunroof open and close switch (3).

IV - SUNROOF MOTOR/COMPUTER

Sunroof motor/computer, located towards the rear of the roof (4).

Sunroof opening motor: Removal - Refitting

PANORAMIC SUNROOF

REMOVAL

I - REMOVAL PREPARATION OPERATION

• Disconnect the battery (see 80A, Battery, Battery: Removal - Refitting, 80A-1) (MR 392, 80A, Battery).
• Remove the headlining (see Headlining: Removal - Refitting) (MR 393, 71A, Body internal trim).

• Disconnect the sunroof supply and control connector (1).

Note: If there is an electrical fault with the motor, it is possible to move the sunroof manually (2) using an Allen key.

II - OPERATION FOR REMOVAL OF PART CONCERNED

• Disconnect the connector.
• Remove:
  • the motor bolts (3),
  • the motor.

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

• Refit the motor.
• Torque tighten the motor bolts (4 N.m).
• Connect the connector.

II - FINAL OPERATION.

• Refit the headlining (see Headlining: Removal - Refitting) (MR 393, 71A, Body internal trim).
• Connect the battery (see 80A, Battery, Battery: Removal - Refitting, 80A-1) (MR 392, 80A, Battery).
• Carry out the necessary operations without the diagnostic tool (see Battery: Initialisation) (MR 394, 80A, Battery).

Sunroof opening control: Removal - Refitting

PANORAMIC SUNROOF

REMOVAL

OPERATION FOR REMOVAL OF PART CONCERNED

• Unclip the roof opening control using a flat-blade screwdriver (1).
• Disconnect the connectors.

REFITTING

REFITTING OPERATION FOR PART CONCERNED

• Connect the connectors.
• Clip the sunroof opening control.

READ NEXT: