Renault Clio: Passenger compartment temperature sensor: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

• Unclip the upper casing.

• Unclip the lower casing (1).

II - OPERATION FOR REMOVAL OF PART CONCERNED

• Disconnect the passenger compartment temperature sensor connector (2).
• Remove:
  • the passenger compartment temperature sensor bolts located inside the lower cover,
  • the passenger compartment temperature sensor.

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

• Refit:
  • the passenger compartment temperature sensor,
  • the passenger compartment temperature sensor bolts located inside the lower cover.
• Connect the passenger compartment temperature sensor connector (3).

II - FINAL OPERATION.

• Clip on:
  • the lower cowling
  • the upper cover.

Exterior air temperature sensor: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

• Remove:
  • the door mirror glass (see Door mirror glass: Removal - Refitting),
  • the door mirror casing (see Door mirror casing: Removal - Refitting).

II - OPERATION FOR REMOVAL OF PART CONCERNED

• Unclip the exterior temperature sensor using a flat-blade screwdriver.

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

• Replace the exterior temperature sensor (see Technical Note 6015A, Electrical wiring repair, 88A, Wiring).
• Clip on the exterior temperature sensor.

II - FINAL OPERATION.

• Refit:
  • the door mirror glass (see Door mirror glass: Removal - Refitting),
  • the door mirror casing (see Door mirror casing: Removal - Refitting).

Solar radiation sensor: Removal - Refitting

CLIMATE CONTROL

REMOVAL

I - REMOVAL PREPARATION OPERATION

• Unclip the display mounting using tool (Car. 1597).

II - OPERATION FOR REMOVAL OF PART CONCERNED

• Remove the solar radiation sensor (1) from underneath the dashboard.
• Disconnect the solar radiation sensor.
• Remove the solar radiation sensor.

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

• Connect the solar radiation sensor.
• Refit the solar radiation sensor (2).

II - FINAL OPERATION.

• Clip on the display mounting.

READ NEXT: