Renault Clio: Pre-postheating unit: Removal - Refitting

Renault Clio III (2005-2013) Service Manual / Engine And Peripherals / Preheating / Pre-postheating unit: Removal - Refitting

K9K

Renault Clio. Pre-postheating unit: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

Remove:
- the battery (see Battery: Removal - Refitting),
- the battery tray (see Battery tray: Removal - Refitting) (MR 392, 80A, Battery).

II - OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Pre-postheating unit: Removal - Refitting

Remove the pre-postheating unit mounting bolt (8).

Renault Clio. Pre-postheating unit: Removal - Refitting

Disconnect the pre-postheating unit connector (9).
Remove the pre-postheating unit.

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

Connect the pre-postheating unit connector.
Refit the pre-postheating unit.
Tighten to torque the pre-postheating unit mounting nut (9 Nm).

II - FINAL OPERATION.

Refit the battery (see Battery: Removal - Refitting)

SEE MORE:

Engine cooling fan assembly: Removal - Refitting

K9K REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Remove: the engine cover, the battery (see Battery: Removal - Refitting) (MR 392, 80A, Battery). Remove: the air filter inlet

Front seat runner: Removal - Refitting

WITHOUT SPORT SEATS, and DOCUMENTATION PHASE 2 IMPORTANT Before beginning work on any component of the safety system, it is essential to lock the airbag computer using the Diagnostic tool (see Airbag and pretensioners: Precautions for the repair) (88C, Airbag and pretensioners). When this function

Renault Clio: Pre-postheating unit: Removal - Refitting

READ NEXT:

Heater plugs: Removal - Refitting

Antipollution

Exhaust gas recirculation: List and location of components

SEE MORE:

Engine cooling fan assembly: Removal - Refitting

Front seat runner: Removal - Refitting