Renault Clio: Centre floor front carpet: Removal - Refitting
Renault Clio III (2005-2013) Service Manual / Trim And Upholstery / Body Internal Trim / Centre floor front carpet: Removal - Refitting
REMOVAL
I - REMOVAL PREPARATION OPERATION
- Remove:
- the complete rear bench seat,
- the front seats (see 75A, Front seat frames and mechanisms, Complete front seat: Removal - Refitting, 75A-33),
- the centre console (see Centre console: Removal - Refitting),
- the front door sill trims (see 71A, Body internal trim, Front door sill lining: Removal - Refitting, 71A-10).
B85
- Unclip the rear door sill trims (see 71A, Body internal trim, Rear door sill lining: Removal - Refitting, 71A-12).
C85
- Remove the rear wing panel lining (see 71A, Body internal trim, Rear panel lining: Removal - Refitting, 71A-32).
II - OPERATION FOR REMOVAL OF PART CONCERNED
- Pull away the rear carpet.
- Pull away the front carpet.
REFITTING
I - REFITTING OPERATION FOR PART CONCERNED
- Refit the front and rear carpets.
II - FINAL OPERATION
C85
- Refit the rear wing panel lining (see 71A, Body internal trim, Rear panel lining: Removal - Refitting, 71A-32).
B85
- Refit the rear door sill trims (see 71A, Body internal trim, Rear door sill lining: Removal - Refitting, 71A-12).
- Refit:
- the front door sill trims (see 71A, Body internal trim, Front door sill lining: Removal - Refitting, 71A-10).
- the centre console (see Centre console: Removal - Refitting),
- the complete rear bench seat,
- the front seats (see 75A, Front seat frames and mechanisms, Complete front seat: Removal - Refitting, 75A-33).
Centre floor rear carpet: Removal - Refitting
REMOVAL
I - REMOVAL PREPARATION OPERATION
- Remove:
- the complete rear bench seat,
- the front seats (see 75A, Front seat frames and mechanisms, Complete front seat: Removal - Refitting, 75A-33),
- the centre console (see Centre console: Removal - Refitting),
- the front door sill trims (see 71A, Body internal trim, Front door sill lining: Removal - Refitting, 71A-10).
B85
- Unclip the rear door sill trims (see 71A, Body internal trim, Rear door sill lining: Removal - Refitting, 71A-12).
C85
- Remove the rear wing panel lining (see 71A, Body internal trim, Rear panel lining: Removal - Refitting, 71A-32).
II - OPERATION FOR REMOVAL OF PART CONCERNED
- Pull away the rear carpet.
REFITTING
I - REFITTING OPERATION FOR PART CONCERNED
- Refit the rear carpets.
II - FINAL OPERATION
C85
- Refit the rear wing panel lining (see 71A, Body internal trim, Rear panel lining: Removal - Refitting, 71A-32).
B85
- Refit the rear door sill trims (see 71A, Body internal trim, Rear door sill lining: Removal - Refitting, 71A-12).
- Refit:
- the front door sill trims (see 71A, Body internal trim, Front door sill lining: Removal - Refitting, 71A-10).
- the centre console (see Centre console: Removal - Refitting),
- the complete rear bench seat,
- the front seats (see 75A, Front seat frames and mechanisms, Complete front seat: Removal - Refitting, 75A-33).
Floor carpet: Removal - Refitting
REMOVAL
OPERATION FOR REMOVAL OF PART CONCERNED
- Remove:
- the rear centre floor carpet (see 71A, Body internal trim, Centre floor rear carpet: Removal - Refitting, 71A-3),
- the front centre floor carpet (see 71A, Body internal trim, Centre floor front carpet: Removal - Refitting, 71A-1),
REFITTING
REFITTING OPERATION FOR PART CONCERNED
- Refit:
- the rear centre floor carpet (see 71A, Body internal trim, Centre floor rear carpet: Removal - Refitting, 71A-3),
- the front centre floor carpet (see 71A, Body internal trim, Centre floor front carpet: Removal - Refitting, 71A-1),
READ NEXT:
Headlining: Removal - Refitting
IMPORTANT
Consult the safety and cleanliness advice and operation
recommendations before carrying out any
repair (see Airbag and pretensioners: Precautions
for the repair) (88C, Airbags and pretensio
Front door sill lining: Removal - Refitting
B85 or C85
REMOVAL
I - REMOVAL PREPARATION OPERATION
Partially remove the seal (1).
Using a pair of unclipping pliers, unclip the bonnet release catch (2).
II - OPERATION FOR REMOVAL OF PART
C
Rear wheel arch trim: Removal - Refitting
B85 or C85
IMPORTANT
Consult the safety and cleanliness advice and
operation recommendations before carrying out
any repair (see Airbag and pretensioners: Precautions
for the repair) (88C, Airbags an
SEE MORE:
Particle filter pressure sensor: Removal - Refitting
K9K, and 772
The pressure measurement circuit must only ever be
opened at the adapters on the exhaust pipe.
REMOVAL
I - REMOVAL PREPARATION OPERATION
Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (MR 392, 02, Lifting equipment).
Disconnect the battery (see Battery: R
Clutch circuit: Removal - Refitting
JH3 or JR5
Note:
Each time an operation is carried out on the
hydraulic clutch system, bleed the circuit:
between the reservoir and the bleed hole,
between the bleed hole and the clutch release
bearing.
REMOVAL
I - REMOVAL PREPARATION OPERATION
K4J or K4M
Remove the resonator.
Remov
© 2016-2025 Copyright Renault Clio Owners Club
