Renault Clio: Front side door sliding window: Removal - Refitting

Renault Clio III (2005-2013) Service Manual / Mechanisms And Accessories / Windows / Front side door sliding window: Removal - Refitting

Note: If the window is broken, replace the sealing film (see Door sealing film: Removal - Refitting) (MR 393, 65A, Door sealing).

REMOVAL

I - REMOVAL PREPARATION OPERATION

• Remove:
  • the door trim (see Front side door trim: Removal - Refitting) (MR 393,72A, Side opening element trim),
  • the interior weatherstrip.

II - OPERATION FOR REMOVAL OF PART CONCERNED

• Open the window lift mechanism access according to the marking on the sealing film.
• Lower the window in order to access the clips (1) on the sliding window.

• Remove the clips from the sliding window (1).

• Remove the front side sliding door window.

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

• Refit:
  • the sliding window,
  • the sliding window clips.
• Carry out a function test.

II - FINAL OPERATION.

• Close the access flaps or replace (if the window is broken) the sealing film (see Door sealing film: Removal - Refitting) (MR 393, 65A, Door sealing).
• Refit:
  • the interior weatherstrip,
  • the door trim (see Front side door trim: Removal - Refitting) (MR 393,72A, Side opening element trim).

Rear side door sliding window: Removal - Refitting

B85 or K85

Note: If the window is broken, replace the sealing film (see Door sealing film: Removal - Refitting) (MR 393, 65A, Door sealing).

REMOVAL

I - REMOVAL PREPARATION OPERATION

• Remove the rear door trim (see Rear side door trim: Removal - Refitting) (MR 393, 72A, Side opening element trim).

• Open the access flap at the window lift mechanism according to the marking on the sealing film.
• Lower the window to access the sliding window clip (1).

• Remove the interior weatherstrip.

II - OPERATION FOR REMOVAL OF PART CONCERNED

• Remove the sliding window clip (1).
• Fit the window at the bottom of the door box section.

• Remove the rear side door glass run channel (see Rear side door window run channel: Removal - Refitting) (MR 393, 66A, Window sealing).

• Remove the rear side door's sliding window.

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

• Fit:
  • the rear side door's sliding window at the bottom of the door box section,
  • the rear side door glass run channel (see Rear side door window run channel: Removal - Refitting) (MR 393, 66A, Window sealing), take care not to damage the outer weatherstrip,
  • the sliding window on the window winder mechanism.
  • the sliding window clip.
• Carry out a function test.

II - FINAL OPERATION.

• Close the access flaps or replace (if the window is broken) the sealing film (see Door sealing film: Removal - Refitting) (MR 393, 65A, Door sealing).
• Refit:
  • the interior weatherstrip,
  • the rear door trim (see Rear side door trim: Removal - Refitting) (MR 393, 72A, Side opening element trim).

READ NEXT: