Renault Clio: Air conditioning: Check

AIR CONDITIONING or CLIMATE CONTROL

Equipment required

Dual-sensor temperature measuring device

Note: When performing RENAULT maintenance, check the air conditioning system at the end of the vehicle's maintenance program so that the engine will be cold.

I - PREPARATION OPERATION FOR THE MEASUREMENT DEVICE

• Check that the measurement device functions properly (see the device's instruction manual).
• Set units to

  READ NEXT:

   Refrigerant circuit: Check

  AIR CONDITIONING or CLIMATE CONTROL IMPORTANT Consult the safety and cleanliness advice and operation recommendations before carrying out any repair (see 62A, Air conditioning, Air conditioning: Prec

   Refrigerant circuit: Draining - Filling

  AIR CONDITIONING or CLIMATE CONTROL IMPORTANT Consult the safety and cleanliness advice and operation recommendations before carrying out any repair (see 62A, Air conditioning, Air conditioning: Prec

   Condenser: Removal - Refitting

  AIR CONDITIONING or CLIMATE CONTROL Note: Before removal, use DIALOGYS to check how the condenser is fitted and arranged. There are 2 possibilities: the condenser and cooling radiator cannot be se

  SEE MORE:

    Lower engine tie-bar: Removal - Refitting

  K9K REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02, Lifting equipment). Disconnect the battery (see Battery: Removal - Refitting) (MR 392, 80A, Battery). Remove the engine undertray. II - OPERATION FOR REMOVAL O

    Right-hand suspended engine mounting: Removal - Refitting

  D4F or K9K, and JH3 REMOVAL I - REMOVAL PREPARATION OPERATION Disconnect the battery (see ) (MR 392, 80A, Battery). Remove: the scuttle panel grille (see Scuttle panel grille: Removal - Refitting) (MR 393, 56A, Exterior equipment), the scoop under the scuttle panel grille (see Scoop un