Renault Clio: Opening Element Sealing

Renault Clio III (2005-2013) Service Manual / Sealing And Soundproofing / Opening Element Sealing

Door sealing film: Removal - Refitting

REMOVAL

Note: The sealing film can only be used once; it is destroyed when it is removed.

It is essential to replace the film with a new one each time it is removed.

REMOVING THE SEALING FILM

Remove the door trim( (see Front side door trim: Removal - Refitting) (MR 393, 72A, Side opening elements trim) or( (see Rear side door trim: Removal - Refitting) (MR 393, 72A, Side opening elements trim).

Renault Clio. Door sealing film: Removal - Refitting

Unclip the interior handle mounting (if the vehicle is fitted with one) using an unclipping tool.

1 - First procedure

Strip off the sealing film using a hot air gun set to approximately 100

SEE MORE:

Fuel vapour recirculation circuit: Function

D4F or F4R or K4J or K4M or M4R WARNING The breather must not be blocked during normal engine operation. The tank is vented through the fuel vapour absorber. Fuel vapour is trapped by the active carbon contained in the absorber as it passes through. Fuel vapour trapped in the absorber is eliminate

Rear seat access mechanisms: Removal - Refitting

C85, and WITHOUT SPORT SEATS, and DOCUMENTATION PHASE 2 IMPORTANT Before beginning work on any component of the safety system, it is essential to lock the airbag computer using the Diagnostic tool (see Airbag and pretensioners: Precautions for the repair) (88C, Airbag and pretensioners). When this

Renault Clio: Opening Element Sealing

READ NEXT:

Window Sealing

Soundproofing

Trim And Upholstery

SEE MORE:

Fuel vapour recirculation circuit: Function

Rear seat access mechanisms: Removal - Refitting