Renault Clio: Rear parcel shelf
Removal

- Lower the rear headrests;
- unhook the two cords 1 from the boot
door;
- lift the parcel shelf 2 to half height in
order to unclip it (movement A);

- push the shelf in (B movement) and
turn it;
- pull the shelf towards you.
To refit, proceed in the reverse order to
removal.
| Maximum weight on rear parcel
shelf: 25 kg, evenly distributed. |
Utility version

Unclip mountings 3 on either side of the
parcel shelf, then remove it via the boot.
To refit it, proceed in the reverse order
to removal.
| Do not place any objects,
especially heavy or solid
objects on the luggage
compartment cover. These
may pose a risk to the vehicle occupants
if the driver has to brake suddenly
or if the vehicle is involved in
an accident. |
READ NEXT:
To remove the flexible section of the luggage compartment cover 1
Pull handle 2 gently to release the pins
from their mounting points located on
each side of the luggage boot.
Guide the lugg
Mobile floor
When fitted to the vehicle, it can be
used to make loading easier.
Note: if you need to access the ISOFIX
ring and/or the net ring at the bottom of
the boot, open flap 3.
Always position the objects transported
so that the largest surface is against:
The rear bench seatback for normal
loads (example A).
The front seatbacks with the rear
seatbacks
SEE MORE:
Diesel engine speed
Diesel engines are fitted with injection
equipment which prevents the engine
speed being exceeded irrespective of
the gear selected.
If the message “CHECK ANTIPOLLUTION
SYSTEM” is displayed
along with warning lights and
, consult an authorised dealer
immediately.
I - MAIN REFERENCE POINTS BEFORE TRIM-SETTING
1 - Front sub-frame in place
The jig crowns the front sub-frame rear mounting bolt (A).
Use this situation for a rear impact or a light frontal impact
without removal of the mechanical components.
2 - Front mechanical components removed
The jig rests
© 2016-2025 Copyright Renault Clio Owners Club
