Renault Clio: M4R

Renault Clio. Cylinder head: Removal - Refitting

IMPORTANT

To avoid all risk of damage to the systems, apply the safety and cleanliness instructions and operation recommendations before carrying out any repair (see Engine: Precautions for the repair).

WARNING

It is strictly forbidden to apply any pressure to the engine oil sump. Damage to the sump will irreparably damage the engine by:

REMOVAL

I - REMOVAL PREPARATION OPERATION

M4R, and 700

M4R, and 701

 

M4R, and 700

Renault Clio. Cylinder head: Removal - Refitting

M4R, and 701

Renault Clio. Cylinder head: Removal - Refitting

 

II - REMOVAL OF CYLINDER HEAD

Renault Clio. Cylinder head: Removal - Refitting

Renault Clio. Cylinder head: Removal - Refitting

Renault Clio. Cylinder head: Removal - Refitting

REFITTING

I - REFITTING PREPARATION OPERATION

WARNING

Protect the oilway so that foreign bodies do not enter the oil pipes in the cylinder head.

Failure to follow this instruction could lead to the blocking of the oilways, resulting in a rapid deterioration of the camshaft.

WARNING

Do not scrape the joint faces of the aluminium, any damage caused to the joint face will result in a risk of leaks.

WARNING

To ensure proper sealing, the gasket surfaces must be clean, dry and not greasy (avoid any finger marks).

II - OPERATION FOR REFITTING THE CYLINDER HEAD

Renault Clio. Cylinder head: Removal - Refitting

Note: Do not retighten the cylinder head bolts after applying this procedure.

READ NEXT:

 F4R

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (02A, Lifting equipment). Disconnect the battery (see Battery: Removal - Refitt

 F4R, and 830

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Disconnect the battery (see Battery: Removal

 Fuel Mixture

SEE MORE:

 Front wing lower mounting support: General description

WARNING The information contained in the following describes the general repair procedure for all vehicles having the same design for this part. Before reading the following general information, make sure that there are no special notes associated with the vehicle. These special notes are specified

 Manual gearbox: Identification

JA3 or JA5 or JH3 or JR5 K4J / K4M / K9K / D4F engines are fitted with type JH and JR manual gearboxes. A marking (1) on the gearbox casing indicates: Gearbox type Gearbox suffix Production plant Production number K9K, and TL4 - F4R, and 830, and TL4 Identification plate Engraving Ge

© 2016-2025 Copyright Renault Clio Owners Club