Renault Clio: Opening Element Sealing
Door sealing film: Removal - Refitting
REMOVAL
Note: The sealing film can only be used once; it is destroyed when it is removed.
It is essential to replace the film with a new one each time it is removed.
REMOVING THE SEALING FILM
- Remove the door trim( (see Front side door trim: Removal - Refitting) (MR 393, 72A, Side opening elements trim) or( (see Rear side door trim: Removal - Refitting) (MR 393, 72A, Side opening elements trim).
- Unclip the interior handle mounting (if the vehicle is fitted with one) using an unclipping tool.
1 - First procedure
- Strip off the sealing film using a hot air gun set to approximately
100
READ NEXT:
Window Sealing
Front side door glass run channel: Removal - Refitting
REMOVAL
I - REMOVAL PREPARATION OPERATION
Remove:
the door trim( (see Front side door trim: Removal
- Refitting) (MR 393, 72A, Side opening
Soundproofing
Bonnet soundproofing: Removal - Refitting
REMOVAL
REMOVAL OPERATION FOR PART CONCERNED
Remove clips (1) using a pair of unclipping pliers.
Remove the bonnet soundproofing.
REFITTING
REFITTING OPE
Trim And Upholstery
Clio IV (2014-2019) offers a range of trim levels and upholstery options to suit individual preferences and style. The trim levels may vary, offering different levels of features and equipment. The up
SEE MORE:
Vehicle on repair bench: Description
I - MAIN REFERENCE POINTS BEFORE TRIM-SETTING
1 - Front sub-frame in place
The jig crowns the front sub-frame rear mounting bolt (A).
Use this situation for a rear impact or a light frontal impact
without removal of the mechanical components.
2 - Front mechanical components removed
The jig rests
Left-hand drive
The equipment fitted, described below, DEPENDS ON THE VERSION AND COUNTRY.
Side air vent.
Stalk for:
direction indicator lights;
exterior lights;
front fog lights;
rear fog lights.
Instrument panel.
Driver Airbag and horn location.
Multimedia system voice control
bu
© 2016-2025 Copyright Renault Clio Owners Club
