Renault Clio: Roof bars/Spoiler

Accessing the mounting points

Renault Clio. Accessing the mounting points


Open the doors to access the mounting points 1.

If original roof bars, approved by our Technical Department, are supplied with screws, only use these screws for attaching the roof bars to the vehicle.

Precautions during use

Handling the tailgate

Before handling the tailgate, check the objects and/or accessories (bike rack, roof box, etc.) fitted to the roof bars: these must be correctly positioned and secured, so as not to hinder the operation of the tailgate.

For information on the range of equipment adapted to your vehicle, we advise you to consult an approved Dealer.

Refer to the manufacturer’s instructions for information on how to fit and use the roof rack bar.

Please keep these instructions with the rest of the vehicle documentation.

Maximum permissible load on roof rack: 80 kg (including the carrying device).

Spoiler A

Renault Clio. Spoiler A


It is forbidden to fix objects and/or accessories (bike racks, etc.) to the spoiler.

READ NEXT:

 Multimedia equipment

The presence and location of this equipment depends on the vehicle version. Multimedia touchscreen; Multimedia sockets; Steering column control; Voice commands; Microphone. Refe

 Maintenance

The maintenance of the Renault Clio IV (2014-2019) involves following the recommended guidelines provided in the owner's manual. Regular maintenance tasks include oil changes, filter replacements, and

 Bonnet

To open the bonnet, pull the handle 1. Before performing any action in the engine compartment, the ignition must be switched off by pressing the engine stop button (please see

SEE MORE:

 Air filter unit: Removal - Refitting

D4F, and 740 or 742 or 764 REMOVAL I - REMOVAL PREPARATION OPERATION Apply pressure to (1). Pull at (2). Remove the air breather sleeve (3) from the front end panel. Undo the clip (4) mounting the air filter unit to the motorised throttle valve. Disconnect the oil vapour rebreathing hose

 Plugs: Removal - Refitting

D4F, and 740 - D4F, and 784 or 786 Spark plug electrode gap REMOVAL I - REMOVAL PREPARATION OPERATION D4F, and 784 Remove the turbocharger air outlet pipe bolt (2) from the inlet distributor. Remove the turbocharger air outlet pipe clip (3) from the turbocharger. Note: If the clip (4) is re

© 2016-2025 Copyright Renault Clio Owners Club